ADUM6201ARIZ-RL

ADUM6201ARIZ-RL is a dual-channel, 5kV isolator with integrated DC-to-DC converter with isoPower®, an integrated, isolated dc-to-dc converter. Based on the Analog Devices, Inc., iCoupler® technology, the dc-to-dc converter provides up to 400mW of regulated, isolated power at either 5.0V or 3.3V from a 5.0V input supply, or at 3.3V from a 3.3V supply at the power levels. This device eliminates the need for a separate, isolated dc-to-dc converter in low power, isolated designs. The iCoupler chip scale transformer technology is used to isolate the logic signals and for the magnetic components of the dc-to-dc converter. It is approved by UL recognition, 5000V rms for 1 minute per UL 1577, CSA component acceptance notice #5A, IEC 60601-1: 250V rms, 8 mm package, IEC 60950-1: 400V rms, 8mm package. Application includes RS-232/RS-422/RS-485 transceivers, industrial field bus isolation, isolated sensor interfaces, industrial PLCs.

• 1 number of inputs VDD1 side, 1 number of inputs VDD2 side, 1Mbps maximum data rate
• 100ns maximum propagation delay (5V), 40ns maximum pulse width distortion
• Switching frequency is 180MHz typ (5V, TA = 25°C), isoPower integrated, isolated dc-to-dc converter
• Output ripple is 75mV p-p typical at (20MHz bandwidth, CBO = 0.1µF-10µF, IISO = 72mA)
• Output noise is 200mV p-p typical at (CBO = 0.1µF-10µF, IISO = 72mA, 5V operation, TA = 25°C)
• Output supply current is 80mA minimum at (VISO <gt/> 4.5V, 5V operation, TA = 25°C)
• Refresh rate is 1Mbps typical at (5V operation, TA = 25°C)
• Line regulation is 1mV/V typical at (IISO = 40mA, VDD1 = 4.5V to 5.5V)
• Temperature range from -40°C to +105°C
• 16-Lead SOIC-IC package

注释

ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party