DS80C320-MCG+

DS80C320-MCG+ is an 80C31-compatible, fast, high-speed/low-power microcontroller. Wasted clock and memory cycles have been removed using a redesigned processor core. As a result, every 8051 instruction is executed between 1.5 and 3 times faster than the original for the same crystal speed. Typical applications see a speed improvement of 2.5 times using the same code and the same crystal. The DS80C320 provides several extras in addition to greater speed. These include a second full hardware serial port, seven additional interrupts, a programmable watchdog timer, a power-fail interrupt and a reset. The device also provides dual data pointers (DPTRs) to speed-block data memory moves. It can also adjust the speed of off-chip data memory access to between two and nine machine cycles for flexibility in selecting memory and peripherals. High-integration controller includes power-fail reset, programmable watchdog timer, early warning power-fail interrupt.

• 8051 pin and instruction set compatible, four 8-bit I/O ports
• Three 16-bit timer/counters, 256bytes scratchpad RAM
• Addresses 64KB ROM and 64KB RAM
• High-speed architecture, 4 clocks/machine cycle (8032=12)
• Single-cycle instruction in 121ns, uses less power for equivalent work, dual data pointer
• Two full-duplex hardware serial ports, 13 total interrupt sources with six external
• 0°C to +70°C temperature range
• 25MHz maximum clock speed
• 40 plastic DIP package

警告

该产品的市场需求较大, 导致交货时间延长。交货日期可能会有延迟。该产品不在折扣范围内。

注释

ADI 产品仅授权（和销售）给客户使用，不得转售或以其他方式转给任何第三方