LT1006CN8#PBF

LT1006 is a first precision single supply operational amplifier. Its design has been optimized for single supply operation with a full set of specifications at 5V. It has a low offset voltage of 20µV, drift of 0.2µV/°C, offset current of 120pA, gain of 2.5 million, common mode rejection of 114dB and power supply rejection of 126dB. Although supply current is only 340µA, a novel output stage can source or sink in excess of 20mA while retaining high voltage gain. Common mode input range includes ground to accommodate low ground-referenced inputs from strain gauges or thermocouples, and output can swing to within a few millivolts of ground. It is used in applications such as low power sample-and-hold circuits, battery-powered precision instrumentation, strain gauge signal conditioners, thermocouple amplifiers, 4mA to 20mA current loop transmitters, active filters.

• Input offset current is 0.15nA typical at (TA = 25°C)
• Input bias current is 9nA typical at (TA = 25°C)
• Input noise voltage is 0.55µVP-P typical at (TA = 25°C)
• Input noise current density is 0.08pA/√Hz typical at (TA = 25°C)
• Common mode rejection ratio is 112dB typical at (TA = 25°C)
• Large-signal voltage gain is 2V/µV typical at (TA = 25°C)
• Slew rate is 0.4V/µs typical at (TA = 25°C)
• Supply current is 350µA typical at (TA = 25°C)
• Power supply rejection ratio is 124dB typical at (TA = 25°C)
• Operating temperature is 0°C to 70°C, package style is 8-lead PDIP

注释

ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party