LT1016IN8#PBF

LT1016 is an ultrafast 10ns comparator. Tight offset voltage specifications and high gain allows the device to be used in precision applications. Matched complementary outputs further extend the versatility of this comparator. A unique output stage provides active drive in both directions for maximum speed into TTL/CMOS logic or passive loads, yet does not exhibit the large current spikes found in conventional output stages. This allows the device to remain stable with the outputs in the active region which, greatly reduces the problem of output “glitching” when the input signal is slow moving or is low level. It is used in applications such as high speed A/D converters, high speed sampling circuits, line receivers, extended range V-to-F converters, fast pulse height/width discriminators, zero-crossing detectors, current sense for switching regulators, high speed triggers, crystal oscillators.

• Operates off single 5V supply or ±5V
• Complementary output to TTL, low offset voltage
• No minimum input slew rate requirement, no power supply current spiking
• Output latch capability, input offset voltage is 1mV typ at (TA = 25°C)
• Input offset voltage drift is 4µV/°C typical at (TA = 25°C)
• Input bias current is 5µA typical at (TA = 25°C)
• Common mode rejection is 96dB typical at (TA = 25°C)
• Small-signal voltage gain is 3000V/V typical at (TA = 25°C)
• Operating temperature is -40°C to 85°C, package style is 8-lead PDIP

注释

ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party