LT1037ACN8#PBF

LT1037ACN8#PBF is a low-noise, high-speed precision operational amplifier. The voltage gain of the device is an extremely high 20 million driving a 2Kohm load and 12 million driving a 600 ohm load to ±10V. In the design, processing, and testing of the device, particular attention has been paid to the optimization of the entire distribution of several key parameters. It is used in applications such as low noise signal processing, microvolt accuracy threshold detection, strain gauge amplifiers, directly coupled audio gain stages, sine wave generators, tape head preamplifiers, and microphone preamplifiers.

• Input offset voltage is 10µV typical at (VS = ±15V, TA = 25°C)
• Input bias current is ±10nA typical at (VS = ±15V, TA = 25°C)
• Input noise voltage is 0.06µVP-P typical at (VS = ±15V, TA = 25°C)
• Common mode rejection ratio is 130dB typical at (VS = ±15V, TA = 25°C)
• Power supply rejection ratio is 130dB typical at (VS = ±15V, TA = 25°C)
• Slew rate is 15V/µs typical at (VS = ±15V, TA = 25°C)
• Gain bandwidth product is 60MHz typical at (fO = 10KHz, (AVCL ≥ 5), VS = ±15V, TA = 25°C)
• Input offset current is 7nA typical at (VS = ±15V, TA = 25°C)
• Large-signal voltage gain is 20V/µV typical at (RL ≥ 2K, VO = ±12V, VS = ±15V, TA = 25°C)
• Operating temperature range from 0°C to 70°C, 8-lead PDIP package

注释

ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party