LT1361CS8#TRPBF

LT1361CS8#TRPBF is a dual channel low power high speed operational amplifier with outstanding AC and DC performance. It features much lower supply current and higher slew rate than devices with comparable bandwidth. The circuit topology is a voltage feedback amplifier with matched high impedance inputs and the slewing performance of a current feedback amplifier. The high slew rate and single stage design provide excellent settling characteristics which make the circuit an ideal choice for data acquisition systems. Each output drives a 500 ohm load to ±13V with ±15V supplies and a 150 ohm load to ±3.2V on ±5V supplies. This amplifier is stable with any capacitive load making them useful in buffer or cable driving applications. It is used in applications such as wideband amplifiers, buffers, active filters, video and RF amplification, cable drivers, data acquisition systems.

• Unity-gain stable, C-Load™ op-amp drives all capacitive loads
• Input offset voltage is 1mV maximum at (TA = 25°C, VCM = 0V)
• Input bias current is 0.3µA typical at (TA = 25°C, VCM = 0V)
• Input offset current is 80nA typical at (TA = 25°C, VCM = 0V)
• Input capacitance is 3pF typical at (TA = 25°C, VCM = 0V)
• Large-signal voltage gain is 9V/mV typical at (TA = 25°C, VCM = 0V)
• Common mode rejection ratio is 92dB typical at (TA = 25°C, VCM = 0V)
• Slew rate is 800V/µs typical at (TA = 25°C, VCM = 0V)
• Gain bandwidth is 50MHz typical at (TA = 25°C, VCM = 0V)
• Operating temperature range from -40°C to 85°C, package style is 8-lead plastic NSOIC

注释

ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party