LTC2436-1IGN#PBF

LTC®2436-1 is a 2-channel differential input micropower 16bit No Latency ∆ΣTM analogue-to-digital converter with an integrated oscillator. The two differential channels convert alternately with a channel identification included in the conversion result. It uses delta-sigma technology and provides single conversion settling of the digital filter. Through a single pin, the LTC2436-1 can be configured for better than 87dB input differential mode rejection at 50Hz and 60Hz ±2%, or it can be driven by an external oscillator for a user-defined rejection frequency. The internal oscillator requires no external frequency setting components. Typical applications include direct sensor digitizer, weight scales, direct temperature measurement, gas analysers, strain-gauge transducers, instrumentation, data acquisition and industrial process control.

• Low supply current of 200µA, 4µA in autosleep
• Differential input and differential reference with GND to VCC common mode range
• 0.12LSB INL, no missing codes and 0.16LSB full-scale error and 0.006LSB offset
• 800nV rms noise, independent of vref
• No latency: digital filter settles in a single cycle and each channel conversion is accurate
• Internal oscillator-no external components required
• 87db min, 50Hz and 60Hz notch filter
• Single supply 2.7V to 5.5V operation and pin compatible with the 24bit LTC2412
• 16 lead SSOP package
• Operating temperature range from -40°C to 85°C

注释

ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party