LTC2604IGN#TRPBF

LTC2604 is a quad 16bit rail-to-rail output DAC. This part has separate reference inputs for each DAC. It has built-in high performance output buffers and are guaranteed monotonic. This part establishes advanced performance standards for output drive, crosstalk and load regulation in single supply, voltage output multiples. The parts use a simple SPI/MICROWIRE compatible 3-wire serial interface which can be operated at clock rates up to 50MHz. Daisy-chain capability and a hardware CLR (active high) function are included. It incorporates a power-on reset circuit. During power-up, the voltage outputs rise less than 10mV above zero scale; and after power-up, this stay at zero scale until a valid write and update take place. Application includes mobile communications, process control and industrial automation, instrumentation, automatic test equipment.

• Guaranteed 16bit monotonic over temperature
• Positive supply voltage range from 2.5V to 5.5V (TA = 25°C, VCC = 5V)
• 16bits minimum monotonicity (TA = 25°C, VCC = 5V)
• Maximum differential nonlinearity is ±1LSB (TA = 25°C, VCC = 5V)
• Typical integral nonlinearity is ±14LSB (TA = 25°C, VCC = 5V)
• 1.5mV typical zero-scale error (TA = 25°C, VCC = 5V)
• Typical offset error is ±1.5mV (TA = 25°C, VCC = 5V)
• Typical gain error is ±0.1%FSR (TA = 25°C, VCC = 5V)
• Typical gain temperature coefficient is ±5ppm/°C (TA = 25°C, VCC = 5V)
• 16 lead narrow SSOP package, operating temperature range from -40°C to 85°C

注释

ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party