需要更多?
数量 | 价钱 (含税) |
---|---|
1+ | CNY249.480 (CNY281.9124) |
10+ | CNY245.450 (CNY277.3585) |
25+ | CNY236.310 (CNY267.0303) |
168+ | CNY229.610 (CNY259.4593) |
336+ | CNY225.020 (CNY254.2726) |
产品信息
产品概述
LTM4642 is a complete dual 4A or single 8A step-down DC/DC μModule® (micromodule) regulator. Included in the package are the switching controller, power FETs, inductor, and all support components. Operating over input voltage ranges of 4.5V to 20V, (2.375V min with external CPWR bias), it supports two outputs with voltage ranges of 0.6V to 5.5V, set by a single external resistor. Its high efficiency design delivers 4A continuous current (5A peak) for each output. High switching frequency and a valley current mode architecture enable a very fast transient response to line and load changes without sacrificing stability. The two outputs are interleaved with 180° phase to minimize the ripple noise and reduce the I/O capacitors. It is widely used in application such as telecom and networking equipment, servers, FPGA power etc.
- Output voltage tracking
- Total DC output voltage Error is ±1.5% maximum
- Upto 95% maximum efficiency
- Constant on-time, valley current mode architecture
- Selectable Burst Mode® operation, output overvoltage and overcurrent protection
- Phase-lockable fixed frequency range is 600KHz to 1.4MHz
- Operating temperature is -40°C to 125°C
- Package style is 56-lead BGA
注释
ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party
技术规格
ITE
4.5V
20V
600mV
5.5V
8A
可调
20V
4.92mm
降压
11.25mm
MSL 3 - 168小时
BGA-56,微型模块
-
2输出
BGA
56引脚
4A
4.5V
1.4MHz
9mm
125°C
LTM4642 Series
No SVHC (21-Jan-2025)
技术文档 (1)
法律与环境
进行最后一道重要生产流程所在的地区原产地:Philippines
进行最后一道重要生产流程所在的地区
RoHS
RoHS
产品合规证书