MAX1607ESA+T

The MAX1607ESA+T is a USB current-limited switch in pin-compatible 8 pin NSOIC package. It is current limited 60mohm switch with built-in fault blanking. Its accurate, preset 0.7A to 1.0A current limit makes it ideal for USB applications. Its low quiescent supply current (14µA) and standby current (1µA) conserve battery power in portable applications. It operates with inputs from +2.7V to +5.5V making it ideal for both 3V and 5V systems. An overcurrent signal (OC- complementary) notifies microprocessor that the internal current limit has been reached. A 10ms overcurrent-blanking feature allows momentary faults to be ignored, thus preventing false alarms to the host system. This blanking also prevents an OC (complementary) signal from being issued when the device is powering up. It has several safety features to ensure that the USB port is protected. It is used in notebook computers, USB ports, USB hubs and docking stations.

• Supply voltage range is 2.7V to 5.5V
• Operating temperature range from -40°C to 85°C
• Pin compatible with TPS2014, TPS2015 and TPS2041
• Accurate current limit (0.7A min, 1.0A max), 0.75A short circuit protection
• Undervoltage lockout, 14µA quiescent supply current, 1µA (max) standby supply current
• 10ms internal OC (complementary) blanking timeout
• No overcurrent OC (complementary) signal during power-up
• 125mohm (max) high side MOSFET, 500mA continuous current
• Short circuit & thermal protection with overcurrent logic output, 1ms start-up time
• UL recognized (#E211935)

注释

ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party