MAX17532ATB+T

The MAX17532ATB+T is an ultra small, high-efficiency, synchronous step-down DC to DC converter with 22µA no-load supply current in 10 pin TDFN package. This 42V The converter can deliver up to 100mA and generates output voltages from 0.8V up to 0.9 x VIN. The feedback (FB) voltage is accurate to within ±1.75% over -40°C to +125°C. It uses peak current mode control and can be operated in pulse-width modulation (PWM) or pulse frequency modulation (PFM) modes. It reduces external components and total cost such as no schottkys synchronous, internal compensation for any output voltage, built-in soft-start and all-ceramic capacitors, compact layout. It reduces number of DC-DC regulators to stock. It is typically used at industrial sensors and process control, high voltage LDO replacement, battery-powered equipment, HVAC and building control.

• Wide 4V to 42V input, adjustable 0.8V to 0.9 x VIN output
• Operating temperature range from -40°C to 125°C
• 100KHz to 2.2MHz adjustable switching frequency with external synchronization
• Reduces power dissipation, 22μA quiescent current, peak efficiency <gt/> 90%
• PFM enables enhanced light-load efficiency, 1.2μA shutdown current
• Operates reliably in adverse environments, peak current limit protection
• Built-in output voltage monitoring RESET
• Programmable EN/UVLO threshold, monotonic start-up into prebiased load
• Overtemperature protection

警告

Market demand for this product has caused an extension in leadtimes. Delivery dates may fluctuate. Product exempt from discounts.

注释

ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party