MAX20046AGTC/V+

MAX20046AGTC/V+ is an automotive Hi-speed USB 2.0 protector. It provides high-ESD and short-circuit protection for the low-voltage internal USB data and USB power line in automotive radio, navigation, connectivity, and USB hub applications. The short-circuit protection features include short-to battery on the protected HVBUS, as well as short-to-HVBUS and short-to-battery on the protected HVD+ and HVD-. Short-to-GND and overcurrent protection are also provided on the protected HVBUS output to protect the internal BUS power rail from overcurrent faults. The device features high-ESD protection to ±15kV air gap and ±8kV contact on the protected HVBUS, HVD+, and HVD- outputs. This device also features an enable input, fault output, 9ms fault-recovery time, 1ms overcurrent-blanking time, and integrated overcurrent auto retry. It is used in automotive USB protection application.

• Short-to-battery and short-to-GND protection on protected HVBUS output
• Short-to-battery and short-to-HVBUS protection on HVD+ and HVD- outputs
• Tested to ISO 10605 and IEC 61000-4-2 ESD standards, AEC-Q100 qualified
• Power-supply range (BUS) from 4.75V to 5.5V
• BUS input current is 500μA maximum at (VBUS = 5.0V VIN = +3.3V, TJ = TA = -40°C to +105°C)
• IN input current is 12μA maximum at (VBUS = 5.0V VIN = +3.3V)
• On-resistance is 270mohm typical at (VBUS = 5.0V VIN = +3.3V, TJ = TA = -40°C to +105°C)
• On-channel -3dB bandwidth is 364MHz typical at (VBUS = 5.0V VIN = +3.3V)
• Operating temperature range from -40°C to +105°C
• 12-pin TQFN-EP package

注释

ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party