MAX22211EVKIT#

MAX22211EVKIT# is a MAX22211 evaluation kit (EV kit) provides a proven design to evaluate the +36V, 3.8A dual H-Bridge MAX22211 motor driver. The MAX22211 can drive two brushed DC motors or a single stepper motor. The MAX22211 IC integrates very low impedance FETs in a dual H-Bridge configuration with a typical RON (high side + low-side) of 0.25Ω. The EV kit features headers, test points and terminal blocks to provide an interface to the MAX22211 motor driver. The MAX22211 integrated current-sense output ISENA and ISENB can be monitored using test points or can be connected to an external ADC using header J4. The MAX22211 features embedded current-drive regulation (CDR) with adjustable chopping current (ITRIP). The MAX22211 EV kit operates from an input voltage of +4.5V to +36V (VM). An on board +3.3V regulator U2 (MAX6765TTSD2+) provides a regulated +3.3V to drive the MAX22211 logic inputs.

• Easy evaluation of the MAX22211
• Configurable current-drive regulation
• On-board +3.3V regulator to drive MAX22211 logic inputs
• Test points and headers to interface with MAX22211 logic inputs and current-sense outputs
• Fully assembled and tested
• Proven PCB layout

注释

ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party