MAX3058ASA+T

MAX3058ASA+T is a 5V, 1Mbps, low-supply current CAN transceiver. The interface between the controller area network (CAN) protocol controller and the physical wires of the bus lines in a CAN. This is primarily intended for printer and telecom backplane applications requiring data rates up to 1Mbps. This device provides differential transmit capability to the bus and differential receive capability to the CAN controller. The MAX3058 features four different modes of operation: high speed, slope control, standby, and shutdown. High speed mode allows data rates up to 1Mbps. In slope-control mode, the slew rate may be optimized for data rates up to 500kbps, so the effects of EMI are reduced, and unshielded twisted or parallel cables can be used. In standby mode, the transmitters are shut off and the receivers are put into low-current mode. Applications include printers JetLink, industrial control networks, telecom backplane, consumer applications.

• Thermal shutdown, current limiting
• ESD protection, ±12kV human body model
• Supply current is 40mA typ at dominant, VCC=+5V and TA=+25°C
• Quiescent current standby mode is 15µA typ at VCC=+5V and TA=+25°C
• Thermal-shutdown threshold is 160°C typ at VCC=+5V and TA=+25°C
• Differential input resistance is 100kohm max at VCC=+5V ±10%, TA=TMIN to TMAX, RL=60 ohm, CL=100pF
• RXD low-output voltage level is 0.4V max at I=1.6mA, VCC=+5V ±10%, TA=TMIN to TMAX, RL=60 ohm
• Bus dominant to RXD active is 1µs max at VRS > 0.8 x VCC (standby)
• 8 SO package
• Temperature range from -40°C to +125°C

警告

该产品的市场需求较大, 导致交货时间延长。交货日期可能会有延迟。该产品不在折扣范围内。

注释

ADI 产品仅授权（和销售）给客户使用，不得转售或以其他方式转给任何第三方