您已在下面突出显示的字段中输入包含无效字符的值。 请仅使用有效字符修改您的选择。
产品可能与您的搜索条件并不完全匹配
您买过此产品。
在订单历史记录中查看
ANALOG DEVICES MAX9626ATC+T
差分放大器, 1 放大器, 2 mV, 1.15 GHz, -40 °C, 125 °C
产品概述
The MAX9626ATC+T is a 1.35GHz fully differential amplifier in 12 pin TQFN package. It is a low-noise, low distortion and high-bandwidth differential amplifier/ADC driver for use in applications from DC to 1.35GHz. The exceptional low input-referred noise and low distortion make this part an excellent solution to drive high-speed 12bit to 16bit pipeline ADCs. The output common mode is set through the VOCM input pin, thus eliminating the need for a coupling transformer or AC-coupling capacitors. It is used in communication, medical imaging, ATE and high-performance instrumentation.
- Single supply voltage range from +2.85V to +5.25V
- Low voltage noise density is 5.7nV/√Hz, noise figure is 22.2dB
- Low harmonic distortion HD2/HD3 of -98/-103dB at 10MHz, HD2/HD3 of -80/-80dB at 125MHz
- 1V/V factory set gain, input offset voltage is 2mV
- Adjustable output common-mode voltage
- Differential to differential or single ended to differential operation
- 25µA shutdown current, 3dB large signal bandwidth is 1150MHz, slew rate is 6500V/Fs
- Power-supply rejection ratio is 89dB (VVCOM = VCC/2, 2.85V <= VCC <= 5.25V, <=-40°C<= TA <=+85°C)
- Gain error is ±0.2%, common-mode rejection ratio is 62dB
- Operating temperature range from -40°C to 125°C
应用
信号处理, 通信与网络, 医用, 传感与仪器
警告
Market demand for this product has caused an extension in leadtimes. Delivery dates may fluctuate. Product exempt from discounts.
产品信息
技术文档 (1)
1,989 有货 需要更多？
×
您现在可以预订货品了 订购所需的数量并按正常方式结算。目前无法交付的数量将列入延期交货订单中，并在到货后立即发货。
交付周期内有额外库存， 交付周期大约为 24-3-4
1,989 英国 有库存，可在 5-6 个工作日内发货
由于市场条件的影响，交货时间仅供一般指导，可能会在短时间内发生变化
- 1+
- 10+
- 25+
- 100+
- 250+
- 500+
- 2500+
| 数量 | 价钱 (不含税) (含税) | 您所支付金额 (不含税) |
|---|---|---|
| 1+ | CNY57.02 CNY64.4326 | ( ) |
| 10+ | CNY51.50 CNY58.195 | ( ) |
| 25+ | CNY46.55 CNY52.6015 | ( ) |
| 100+ | CNY42.69 CNY48.2397 | ( ) |
| 250+ | CNY40.73 CNY46.0249 | ( ) |
| 500+ | CNY37.16 CNY41.9908 | ( ) |
| 2500+ | CNY31.77 CNY35.9001 | ( ) |
| 数量 | 价钱 (不含税) (含税) | 您所支付金额 (不含税) |
|---|
定价不可用。 请联系客户服务。
1 (切割卷带 2799368) x 57.02 = CNY57.02
1 (切割卷带 2799368) x 64.4326 = CNY64.4326
总价: CNY57.02
( 不含税 )
总价: CNY64.43
( 含税 )
选择您的包装首选项
筛选器工具