MAX96717GTJ/VY+

MAX96717GTJ/VY+ CSI-2 to GMSL2 serializer receives video on a MIPI CSI-2 interface and outputs it on a GMSL2 serial link transceiver. Simultaneously, it sends and receives bidirectional control channel data across the same GMSL2 link. GMSL2 data can be transported over Coaxial or Shielded-Twisted Pair (STP) cables. The device is programmed through a local 1²C/UART interface or across the link from a matching deserializer. This includes two 1²C/ UART pass-through channels, flexible GPIO, SPI tunnel, a built-in ADC, temperature sensor, and an extensive set of diagnostics for functional safety. Data can be transmitted over low-cost 50 ohm coax or 100 ohm STP cables that meet the GMSL2 channel specification. Applications include advanced driver assistance systems (ADAS), 8Mp 40fps forward-vision camera (FVC) systems, surround view systems (SVS), driver monitor systems (DMS), rear-view camera (RVC), systems with multiple synchronized cameras.

• Automotive grade high speed link, -21.0dB at 3GHz (6Gbps) max Insertion Loss
• Auto adapt for changes in channel conditions
• Four-lane MIPI CSI-2 v1.3 input port, MIPI D-PHY v1.2 Receivers rated at 2.5Gbps per lane
• Supports any CSI-2 data type in tunnelling mode
• Cyclic redundancy check (CRC), and error correction code (ECC)
• 16 virtual channels, polarity flip and data lane reassignment
• Full-duplex communication over a single wire
• ASIL-B compliant, end-to-end data integrity through CRC in tunnelling mode
• Concurrent side channel for device configuration and communication with peripherals
• 32 lead TQFN-SW-EP package, operating ambient temperature range from -40°C to +105°C

注释

ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party