CY8C4245AXI-483

The CY8C4245AXI-483 is a PSoC® 4 Microcontroller, scalable and reconfigurable platform architecture for a family of mixed-signal programmable embedded system controllers with an ARM® Cortex™-M0 CPU. It combines programmable and reconfigurable analogue and digital blocks with flexible automatic routing. The PSoC 4200 product family, based on this platform, is a combination of a microcontroller with digital programmable logic, high-performance analogue-to-digital conversion, op-amps with comparator mode and standard communication and timing peripherals. The PSoC 4200 products will be fully upward compatible with members of the PSoC 4 platform for new applications and design needs. The programmable analogue and digital subsystems allow flexibility and in-field tuning of the design.

• 48MHz ARM Cortex-M0 CPU with Single Cycle Multiply, up to 32kb Flash with Read Accelerator
• Two Op-amps with reconfigurable high-drive external and high-bandwidth internal drive
• 12-bit, 1Msps SAR ADC with Differential/Single-ended modes, channel sequencer with signal averaging
• Two Current DACs (IDACs) for General-purpose or Capacitive Sensing Applications on Any Pin
• Two Low-power Comparators that Operate in Deep Sleep Mode
• Four Programmable Logic Blocks called Universal Digital Blocks, each with 8 Macrocells & Data path
• Cypress-provided Peripheral Component Library, User-defined State Machines and Verilog Input
• Low-power 1.71 to 5.5V operation, 20nA stop mode with GPIO pin wakeup, hibernate & deep sleep mode
• Cypress CapSense Sigma-Delta (CSD) Provides Best-in-class SNR (<gt/>5:1) and Water Tolerance
• Cypress-supplied software component makes capacitive sensing design easy automatic hardware tuning
• Segment LCD drive, LCD drive supported on all pins, operates in sleep mode with 4-bit per pin memory
• Run-time reconfigurable Serial Communication Blocks with reconfigurable I²C, SPI, UART functionality
• Four 16-bit Timer/Counter Pulse-width Modulator (TCPWM) Blocks
• Centre-aligned, Edge and Pseudo-random Modes
• Comparator-based triggering of kill signals for Motor Drive and other Digital Logic applications
• 36 GPIO pins can be CapSense, LCD, Analogue or Digital, Drive modes & Slew rates are Programmable
• Integrated Development Environment (IDE) provides schematic design entry and build
• Applications Programming Interface (API) component for all fixed-function & programmable peripherals
• After Schematic Entry, Development can be Done with ARM-based Industry-standard Development Tools