有货时请通知我
数量 | 价钱 (含税) |
---|---|
1+ | CNY105.340 (CNY119.0342) |
10+ | CNY91.670 (CNY103.5871) |
25+ | CNY87.010 (CNY98.3213) |
50+ | CNY83.210 (CNY94.0273) |
100+ | CNY79.010 (CNY89.2813) |
产品信息
产品概述
The MK22FN1M0VLL12 is a 32-bit Kinetis K2x Microcontroller with USB control, based on ARM Cortex-M4 RISC architecture core operates at a maximum frequency of 120MHz. The device incorporates 1MB internal flash, 128kB internal RAM, two 16-bit SAR A/D converter, one 12-bit D/A converter and 66 general-purpose I/O pins. This device also features communication interfaces like five UART modules, three SPI modules, three I2C modules and one I2S module.
- ARM Cortex-M4 core with DSP instructions delivering 1.25 Dhrystone MIPS per MHz
- FlexBus external bus interface
- Multiple low-power modes - low leakage wakeup unit
- Memory protection unit with multi-master protection
- 16-channel DMA controller
- External watchdog monitor and software watchdog
- Hardware CRC module
- 128-bit Unique identification (ID) number per chip
- Three analog comparators (CMP)
- Voltage reference
- USB Full-/low-speed On-the-Go controller
- USB device charger detect
- Controller area network (CAN) module
- Secure digital host controller (SDHC)
- Two 8-channel Flex-timers (PWM/motor control)
- Two 2-channel Flex-timers (PWM/quad decoder)
- Periodic interrupt timers and 16-bit Low-power timer
- Carrier modulator transmitter
- Real-time clock
- Programmable delay block
- 3 to 32MHz and 32kHz Crystal oscillator
- PLL, FLL and multiple internal oscillators
警告
Market demand for this product has caused an extension in leadtimes. Delivery dates may fluctuate. Product exempt from discounts.
技术规格
Kinetis K Family K2x Series Microcontrollers
32位
1MB
LQFP
CAN, I2C, I2S, SPI, UART, USB
24放大器
1.71V
-40°C
表面安装
K2x
MSL 3 - 168小时
ARM 皮质-M4
120MHz
100引脚
66输入
128KB
16Bit
3.6V
105°C
Kinetis K
-
No SVHC (27-Jun-2024)
法律与环境
进行最后一道重要生产流程所在的地区原产地:China
进行最后一道重要生产流程所在的地区
RoHS
RoHS
产品合规证书