产品信息
产品概述
BGSA143GL10E6327XTSA1 is a low resistance antenna tuning switch. It is a small and versatile single-pole quad throw (SP4T) RF switch optimized for low Coff as well as low Ron enabling applications up to 6.0GHz. GPIO digital control lines offer the possibility to adopt SP4T, SPDT along with SPST topology for an optimum flexibility in RF Front-end designs. It is ideal for high Q tuning applications. This single supply chip integrates on-chip CMOS logic control. It can be driven by 2 or 3 CMOS or TTL compatible control input signals. Due to its high RF voltage ruggedness and OFF RF ports reflective short feature, it is suited for switching any reactive devices such as inductors and capacitors in RF matching circuits without significant losses, also mitigating or even eradicating unwanted parasitic RF resonances. Typical applications include impedance tuning, antenna tuning, inductance tuning, tunable filters.
- Qualified for industrial applications according to the relevant tests of JEDEC47/20/22
- Ultra low RON resistance of 1.15ohm at each port in ON state
- Low COFF capacitance of 140fF at each port in OFF state
- High RF operating peak voltage handling of 42V in OFF state
- Low harmonic generation, resonance-stopper antenna tuning
- 3 GPIO pins control interface
- No RF parameter change within supply voltage range
- 40dBm RF input power max (pulsed, duty cycle of 25% with T-period= 4620µs, ON-state, setup as off)
- TSLP-10-2 package
- Ambient temperature range from -40 to 85°C
警告
Stresses above the maximum values listed here may cause permanent damage to the device.
技术规格
-
TSLP
-
-
-
MSL 1 -无限制
6Hz
10引脚
-
-
-
No SVHC (21-Jan-2025)
技术文档 (1)
法律与环境
进行最后一道重要生产流程所在的地区原产地:Malaysia
进行最后一道重要生产流程所在的地区
RoHS
RoHS
产品合规证书