产品信息
产品概述
CYPAS213A124SXQTXUMA1 is an EZ-PD™ PAG2S-PS integrated USB PD and synchronous-rectification controller. It Is an integrated secondary-side controller with USB power delivery controller and synchronous rectifier. EZ-PD™ PAG2S-PS is targeted towards USB-C power adapters, it fits well into high-efficiency AC-DC flyback designs with USB power delivery, Qualcomm quick charge, and other standard charging protocols. EZ-PD™ PAG2S-PS also supports USB power delivery extended power range (EPR) mode. It supports synchronous rectification in quasi-resonant (QR), critical conduction mode (CrCM), discontinuous conduction mode (DCM), and continuous conduction code (CCM) and supports switching frequency up to 300KHz. It is used in applications such as USB-C chargers and adapters, USB-C chargers and adapters with EPR, power adapters supporting both USB PD and legacy charging.
- SR driver works with both standard MOSFET and logic level MOSFET
- USB PD 3.1 compliant with extended power range (EPR) support of up to 28V VBUS
- Integrates a 32-bit Cortex® M0+ with 64Kb flash, 8Kb SRAM, and 64Kb ROM
- Latch up current limit is 100mA maximum
- Integral non-linearity (ADC DC) is 2.5LSB maximum
- Pull-down resistor value (GPIO) is 5.6Kohm typical
- CPU input frequency is 48MHz maximum
- Power supply slew rate during power up is 67V/ms maximum
- Switch turn-on time (Ton) is 600µs maximum
- Operating temperature range from -40°C to +85°C, 24-pin SOIC package
技术规格
USB C电力传输(PD)控制器
DFP
1端口
24引脚
3.15V
-
105°C
-
灌, 源
USB PD 2.0, 3.0, 3.1
SOIC
表面安装
30V
-40°C
-
No SVHC (21-Jan-2025)
技术文档 (1)
法律与环境
进行最后一道重要生产流程所在的地区原产地:Taiwan
进行最后一道重要生产流程所在的地区
RoHS
RoHS
产品合规证书