需要更多?
数量 | 价钱 (含税) |
---|---|
1+ | CNY25.890 (CNY29.2557) |
10+ | CNY24.520 (CNY27.7076) |
25+ | CNY22.950 (CNY25.9335) |
50+ | CNY21.900 (CNY24.747) |
100+ | CNY20.970 (CNY23.6961) |
250+ | CNY20.050 (CNY22.6565) |
500+ | CNY19.150 (CNY21.6395) |
1000+ | CNY18.770 (CNY21.2101) |
产品信息
产品概述
TLE4929CXANM28HAMA1 is an AEC qualified crankshaft sensor. It is an active hall sensor ideally suited for crankshaft applications and similar industrial applications, such as speedometers or any speed sensor with high accuracy and low jitter capabilities. The fully programmable crankshaft sensor is qualified for automotive usage. It has two integrated capacitors on the lead frame. This capacitor increases the EMC resistivity of the device. A pull-up resistor RLoad is mandatory on the output pin and determines the maximum current through the output transistor. Application includes TLE4929C an active Hall sensor ideally suited for crankshaft applications and similar industrial applications, such as a speedometer or any speed-sensor with high accuracy and low jitter capabilities.
- Measures speed and position of tooth/pole wheels
- Switching point in middle of the tooth enables backward compatibility
- Magnetic stray-field robustness due to differential sensing principle
- Digital output signal with programmable output-protocol including diagnosis interface
- Direction detection and stop-start-algorithm
- High accuracy and low jitter, high sensitivity enable large air gap
- End-of-line programmable to adapt to engine parameters
- Can be used as a differential camshaft sensor, wide automotive operating temperature range
- PG-SSO-3-52 package
- Junction temperature range from -40 to 185°C (exposure time max. 10 × 1 h, VDD = 16V)
技术规格
方向检测传感器
PG-SSO-3-52
PG-SSO-3-52
16V
175°C
AEC-Q100
Lead (21-Jan-2025)
15mA
3引脚
4V
-40°C
-
AEC-Q100
技术文档 (1)
法律与环境
进行最后一道重要生产流程所在的地区原产地:Malaysia
进行最后一道重要生产流程所在的地区
RoHS
RoHS
产品合规证书