您已在下面突出显示的字段中输入包含无效字符的值。 请仅使用有效字符修改您的选择。

产品可能与您的搜索条件并不完全匹配

您买过此产品。 在订单历史记录中查看

 
 

DS2411R+T&R

硅序列号, 1.5 V至5.25 V, SOT-23-3

MAXIM INTEGRATED PRODUCTS DS2411R+T&R
×

图片仅用于图解说明,详见产品说明。

制造商产品编号:
DS2411R+T&R
库存编号
2514565
查看所有技术文档

产品概述

The DS2411R+T&R is a low cost silicon serial number with VCC input in 3 pin SOT-23 package. This device generates unique, factory lasered and tested 64bit electronic registration number with external power supply (8bit family code (01h), 48bit serial number and 8bit CRC tester). It provides an absolutely unique identity that can be determined with minimal electronic interface (typically, a single port pin of microcontroller). Data is transferred serially through Maxim 1-wire protocol. The external power supply is required which extends the operating voltage range of device below typical 1-wire devices. The DS2411 is used in PCB ID and authentication, peripheral ID and control, accessory identification, equipment registration, module identification, network reference design, license management and node identification.
  • Supply voltage range from 1.5V to 5.25V
  • Operating temperature range from -40°C to 85°C
  • Active supply current of 100µA and standby supply current of 1µA
  • Built-in multidrop controller enables multiple DS2411 to reside on common 1-wire network
  • Multidrop compatible with other 1-wire products
  • 8bit family code identifies device as DS2411 to the 1-wire master
  • Directly connects to single port pin of a microprocessor and communicates at up to 15.4Kbps
  • Overdrive mode boosts communication speed to 125Kbps

应用

医用

警告

Market demand for this product has caused an extension in leadtimes. Delivery dates may fluctuate. Product exempt from discounts.

产品信息

想要查看类似产品?只需在下方选择所需属性并点击按钮 ×


:
硅序列号

:
1.5V

:
5.25V

:
SOT-23

:
3引脚

:
-40°C

:
85°C

:
-

:
-

:
MSL 1 -无限制
查找类似产品 选择并修改以上属性即可查找类似产品。

技术文档 (2)

CAD 下载

×

条款

CAD Models - Notice
CAD Models and drawings are provided to you on a revocable limited licence for your internal use only but remain the property of the manufacturer who retain all intellectual property rights and ownership. They are provided to assist you in decision making and as design guide but are not guaranteed to be error free, accurate or up to date and is not intended to be taken as advice.
Use of these CAD models and other options provided are downloaded and used entirely at your own risk and by continuing you confirm acceptance of the above.

接受 取消
包装类型 切割卷带

9 有货 需要更多?

9 Shanghai 有货,可次日送达(在 CST 下午 4.30 之前订购)

CNY11.29 ( CNY12.76  含增值税)

定价不可用。 请联系客户服务

包装规格:
单件(切割供应)
多件: 1 最低: 1
数量 单价(含增值税) 您所支付金额(含增值税)
 
 
1+ CNY11.29 (CNY12.76)
优惠价格
合约价格
仅限网络价格
仅限网络合约价格
  ( )
10+ CNY10.15 (CNY11.47)
优惠价格
合约价格
仅限网络价格
仅限网络合约价格
  ( )
25+ CNY9.57 (CNY10.81)
优惠价格
合约价格
仅限网络价格
仅限网络合约价格
  ( )
100+ CNY8.16 (CNY9.22)
优惠价格
合约价格
仅限网络价格
仅限网络合约价格
  ( )
250+ CNY7.66 (CNY8.66)
优惠价格
合约价格
仅限网络价格
仅限网络合约价格
  ( )
500+ CNY7.19 (CNY8.12)
优惠价格
合约价格
仅限网络价格
仅限网络合约价格
  ( )
 
 

定价不可用。 请联系客户服务

No longer stocked:: No Longer Manufactured::
添加到购物篮 添加到购物篮 预订
添加
受限制物品
添加部件编号/注释行
总价:
总价: ( )
总价: --