您已在下面突出显示的字段中输入包含无效字符的值。 请仅使用有效字符修改您的选择。
产品可能与您的搜索条件并不完全匹配
您买过此产品。
在订单历史记录中查看
MAX25520EVKIT#
评估板, MAX25520ATEB/V+, 显示器, TFT-LCD电源
产品概述
MAX25520EVKIT is a fully assembled and tested surface mount PCB used to evaluate the MAX25520 automotive 2-channel TFT-LCD power supply. The output rails, AVDD and NAVDD, can be programmed independently or programmed to track each other by using a specific configuration. Independent enable pins allow complete flexibility in powering up and down the outputs. The outputs are protected against overcurrent and undervoltage. The device incorporates a fully integrated current-mode boost converter and a current-mode inverter with external rectifier. The EV kit operates at one of two switching frequencies, 420KHz or 2.1MHz. Operation at 2.1MHz makes possible very compact dual output power supplies. The EV kit demonstrates the device features of adjustable output voltage and fault protection.
- Input voltage range from 2.6V to 5.5V
- O/p voltage in tracking mode: 6.8V at 200mA(boost converter), -6.8V at -200mA(inverter regulator)
- Synchronous boost provides positive o/p at upto 10.5/200mA, inverter o/p upto -10.5/-200mA
- Spread spectrum
- UV diagnostic on all o/ps and fault detection
- Complete sequencing flexibility
- Operating temperature range from -40°C to 125°C
产品信息
技术文档 (1)
CAD 下载
--请选择...
✔
--请选择...
×
条款
CAD Models - Notice
CAD Models and drawings are provided to you on a revocable limited licence for your internal use only but remain the property of the manufacturer who retain all intellectual property rights and ownership. They are provided to assist you in decision making and as design guide but are not guaranteed to be error free, accurate or up to date and is not intended to be taken as advice.
Use of these CAD models and other options provided are downloaded and used entirely at your own risk and by continuing you confirm acceptance of the above.
筛选器工具