您已在下面突出显示的字段中输入包含无效字符的值。 请仅使用有效字符修改您的选择。
产品可能与您的搜索条件并不完全匹配
您买过此产品。
在订单历史记录中查看
MAX3643ETG+T
激光二极管驱动器, 激光二极管, 2.5Gbps, 3V至3.6V, TQFN-24
产品概述
The MAX3643ETG+T is a 155Mbps to 2.5Gbps burst mode laser driver in 24 pin TQFN package. This burst mode laser driver provides bias and modulation current drive for PON burst-mode ONT applications. It is specifically designed for use with a low cost external controller for APC (and if desired, AMC) loop. A high speed differential burst-enable input enables driver to switch laser from a dark (output off) condition to full on-condition in less than 2ns. When BEN is inactive, typical modulation and bias currents are 5µA each. Laser modulation current can be set from 10mA to 85mA and bias current can be set from 1mA to 70mA using MODSET and BIASSET inputs. A sample and hold circuit is provided to capture monitor diode output during short PON bursts, if needed and BEN high speed signal is mirrored on an LVCMOS output to be used by controller operating the APC/AMC loop. It is used in A/B/G/XGPON ONT modules up to 2.5Gbps and 1.25Gbps IEEE EPON ONT modules.
- Supply voltage range is 3V to 3.6V
- Operating temperature range from -40°C to +85°C
- Output transition time is 45ps
- Turn-on/-off time is 2ns
- Reference voltage generator
- LVPECL high-speed inputs (data, burst enable)
- Maximum data rate of 2500Mbps
应用
电源管理
产品信息
技术文档 (1)
包装类型
切割卷带
2,278 有货 需要更多？
×
您现在可以预订货品了 订购所需的数量并按正常方式结算。目前无法交付的数量将列入延期交货订单中，并在到货后立即发货。 只有在发货后才会收取您的费用。
交付周期内有额外库存， 交付周期大约为 21-3-29
2,278 可于 4 至 5 个工作日内送达
| 数量 | 单价（含增值税） | 您所支付金额（含增值税） |
|---|---|---|
| 1+ | CNY26.63 (CNY30.09) | ( ) |
| 10+ | CNY23.95 (CNY27.06) | ( ) |
| 25+ | CNY22.63 (CNY25.57) | ( ) |
| 50+ | CNY20.56 (CNY23.23) | ( ) |
| 100+ | CNY18.56 (CNY20.97) | ( ) |
| 250+ | CNY18.36 (CNY20.75) | ( ) |
| 2500+ | CNY18.00 (CNY20.34) | ( ) |
定价不可用。 请联系客户服务。
筛选器工具