需要更多?
数量 | 价钱 (含税) |
---|---|
1+ | CNY18.080 (CNY20.4304) |
10+ | CNY12.320 (CNY13.9216) |
25+ | CNY11.280 (CNY12.7464) |
100+ | CNY10.230 (CNY11.5599) |
300+ | CNY9.660 (CNY10.9158) |
500+ | CNY9.080 (CNY10.2604) |
2500+ | CNY8.890 (CNY10.0457) |
产品信息
产品概述
The MAX4040ESA+ is a single, low cost, micropower rail to rail I/O op-amp in 8 pin NSOIC package. This amplifier provides a 90KHz gain bandwidth product while using only 10μA of supply current per amplifier. The combination of low voltage operation, rail to rail inputs and outputs and ultra low power consumption makes this device ideal for any portable/battery powered system. This amplifier has outputs that typically swing to within 10mV of the rails with a 100Kohm load. The rail to rail input and output characteristics allow the full power supply voltage to be used for signal range. The combination of low input offset voltage, low input bias current and high open-loop gain makes it suitable for low power/ low voltage precision applications.
- Supply voltage range is ±1.2V to ±2.75V, 2.4V to 5.5V
- Operating temperature range from -40°C to 85°C
- No phase reversal for overdriven inputs
- Input offset voltage is 200μV
- Unity gain stable for capacitive loads up to 200pF
- Outputs swing rail to rail
注释
ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party
技术规格
1放大器
40V/ms
NSOIC
通用
200µV
表面安装
85°C
-
No SVHC (21-Jan-2025)
-
1个放大器
90kHz
± 1.2V至± 2.75V, 2.4V至5.5V
8引脚
轨至轨输入/输出(RRIO)
2nA
-40°C
-
MSL 1 -无限制
NSOIC
90kHz
40V/ms
技术文档 (1)
法律与环境
进行最后一道重要生产流程所在的地区原产地:Thailand
进行最后一道重要生产流程所在的地区
RoHS
RoHS
产品合规证书