需要更多?
数量 | 价钱 (含税) |
---|---|
1+ | CNY26.360 (CNY29.7868) |
10+ | CNY17.500 (CNY19.775) |
25+ | CNY17.210 (CNY19.4473) |
100+ | CNY15.120 (CNY17.0856) |
300+ | CNY14.480 (CNY16.3624) |
500+ | CNY13.830 (CNY15.6279) |
2500+ | CNY13.750 (CNY15.5375) |
产品信息
产品概述
The MAX4123ESA+ is a single, wide bandwidth, low power, single supply rail to rail I/O operational amplifier (op-amp) in 8 pin NSOIC package. This device operate either in a single supply (+2.7V to +6.5V) or dual supplies (±1.35V to ±3.25V) with a common-mode voltage range that extends 250mV beyond VEE, VCC and capable of driving 250 ohm loads. This op-amp require only 650µA quiescent current per amplifier with its rail to rail input common-mode range and output swing, amplifier is ideal for low voltage, single supply operation. Although the minimum operating voltage is specified at 2.7V, the device typically operate down to 1.8V. In addition, low offset voltage and high speed makes it ideal signal-conditioning stages for precision, low voltage and data acquisition systems. It has a 5MHz gain bandwidth product and characterized with a shutdown mode in which the outputs are placed in a high impedance state and the supply current is reduced to only 25µA per amplifier.
- Stable with 500pF capacitive loads
- Operating temperature range from -40°C to 85°C
- Unity gain stable
- No phase reversal for overdriven inputs
- Input offset voltage of 200µV
- Power supply rejection ratio of 100dB at VCC = 2.7V to 6.5V
- Slew rate of 2V/µs
注释
ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party
技术规格
1放大器
5V/µs
NSOIC
通用
200µV
表面安装
85°C
-
No SVHC (21-Jan-2025)
-
1个放大器
5MHz
± 1.35V至± 3.25V, 2.7V至6.5V
8引脚
轨至轨输入/输出(RRIO)
50nA
-40°C
-
MSL 1 -无限制
NSOIC
5MHz
5V/µs
法律与环境
进行最后一道重要生产流程所在的地区原产地:Thailand
进行最后一道重要生产流程所在的地区
RoHS
RoHS
产品合规证书