有货时请通知我
数量 | 价钱 (含税) |
---|---|
1+ | CNY46.050 (CNY52.0365) |
10+ | CNY35.360 (CNY39.9568) |
50+ | CNY30.900 (CNY34.917) |
100+ | CNY29.360 (CNY33.1768) |
250+ | CNY28.330 (CNY32.0129) |
500+ | CNY27.450 (CNY31.0185) |
1000+ | CNY26.800 (CNY30.284) |
产品信息
产品概述
The MAX4132EUA+ is a dual, wide bandwidth, low power, single supply rail to rail I/O operational amplifier (op-amp) in 8 pin µMAX package. This device operate either in a single supply (+2.7V to +6.5V) or dual supplies (±1.35V to ±3.25V) with a common-mode voltage range that extends 250mV beyond VEE, VCC and capable of driving 250 ohm loads. This op-amp require only 900µA quiescent current per amplifier with its rail to rail input common-mode range and output swing, amplifier is ideal for low voltage, single supply operation. Although the minimum operating voltage is specified at 2.7V, the device typically operate down to 1.8V. In addition, low offset voltage and high speed make it ideal signal-conditioning stages for precision, low voltage and data acquisition systems.
- Stable with 500pF capacitive loads
- Operating temperature range from -40°C to 85°C
- Unity gain stable
- No phase reversal for overdriven inputs
- Input offset voltage of 250µV
- Power supply rejection ratio of 100dB at VCC = 2.7V to 6.5V
- Slew rate of 4V/µs
- 10MHz gain bandwidth product
注释
ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party
技术规格
2放大器
4V/µs
µMAX
通用
400µV
表面安装
85°C
-
No SVHC (21-Jan-2025)
-
2个放大器
10MHz
± 1.35V至± 3.25V, 2.7V至6.5V
8引脚
轨至轨输入/输出(RRIO)
50nA
-40°C
-
MSL 1 -无限制
µMAX
10MHz
4V/µs
技术文档 (1)
法律与环境
进行最后一道重要生产流程所在的地区原产地:Thailand
进行最后一道重要生产流程所在的地区
RoHS
RoHS
产品合规证书