您已在下面突出显示的字段中输入包含无效字符的值。 请仅使用有效字符修改您的选择。
产品可能与您的搜索条件并不完全匹配
您买过此产品。
在订单历史记录中查看
MAX4236AESA+
运算放大器, 轨至轨输出, 1个放大器, 1.7 MHz, 0.3 V/µs, ± 1.2V至± 2.75V, 2.4V至5.5V, NSOIC, 8 引脚
产品概述
The MAX4236AESA+ is a very high precision, 3V/5V rail to rail operational amplifier (op-amp) in 8 pin NSOIC package. The device has an exceptionally low offset voltage and offset voltage temperature coefficient without using any chopper techniques. The MAX4236 has typical large signal, open loop voltage gain of 120dB and ultra low input bias current of 1pA. It is unity gain stable with gain bandwidth product of 1.7MHz and slew rate of 0.3V/µs. The op-amp has shutdown function in which quiescent current is reduced to less than 0.1µA and the amplifier output is forced in to high impedance state. The input common mode range of MAX4236 extends below the negative supply range and output swings rail to rail. This feature make the amplifier ideal for applications with +3V or +5V single power supplies. It is used in strain gauges, piezoelectric sensors, thermocouple amplifiers, battery powered instrumentation, electrochemical sensors and instrumentation amplifiers.
- Supply voltage range from ± 1.2V to ± 2.75V, 2.4V to 5.5V
- Operating temperature range from -40°C to 85°C
- Input offset voltage of ±5µV at VCC = +5V, TA = +25°C
- Input offset voltage temperature coefficient of ±0.6µV/°C at VCC = +5V
- Input offset current of ±1pA
- Rail to rail output swing in to 1Kohm load
- 350µA quiescent current in normal mode at VCC = +5V
- 200pF capacitive load handling capability
- CMRR of 102dB at VCC = +5V, TA = +25°C and PSRR of 120dB at VCC = 2.4V to 5.5V, TA = +25°C
- Ground sensing, input common mode range includes negative rail
应用
信号处理
警告
Market demand for this product has caused an extension in leadtimes. Delivery dates may fluctuate. Product exempt from discounts.
产品信息
技术文档 (2)
CAD 下载
--请选择...
✔
--请选择...
×
条款
CAD Models - Notice
CAD Models and drawings are provided to you on a revocable limited licence for your internal use only but remain the property of the manufacturer who retain all intellectual property rights and ownership. They are provided to assist you in decision making and as design guide but are not guaranteed to be error free, accurate or up to date and is not intended to be taken as advice.
Use of these CAD models and other options provided are downloaded and used entirely at your own risk and by continuing you confirm acceptance of the above.
可延期交货
| 数量 | 单价（含增值税） | 您所支付金额（含增值税） |
|---|---|---|
| 1+ | CNY15.24 (CNY17.22) | ( ) |
| 10+ | CNY13.72 (CNY15.50) | ( ) |
| 25+ | CNY12.97 (CNY14.66) | ( ) |
| 100+ | CNY10.79 (CNY12.19) | ( ) |
定价不可用。 请联系客户服务。
筛选器工具