您已在下面突出显示的字段中输入包含无效字符的值。 请仅使用有效字符修改您的选择。
产品可能与您的搜索条件并不完全匹配
您买过此产品。
在订单历史记录中查看
MAX4380EUT+T
运算放大器, 1个放大器, 210 MHz, 485 V/µs, ± 2.25V至± 5.5V, 4.5V至11V, SOT-23, 6 引脚
产品概述
The MAX4380EUT+T from Maxim Integrated Products is an ultra small, low cost, 210MHz, single supply operational amplifier with rail to rail outputs and disable in 6 pin SOT-23 package. This unity gain stable device that combine high-speed performance, rail to rail outputs and high impedance disable mode. This device operate from a +4.5V to +11V single supply or from ±2.25V to ±5.5V dual supplies. The common mode input voltage range extends beyond the negative power supply rail (ground in single-supply applications). It requires only 5.5mA of quiescent supply current per op amp. It is an excellent solution in low power/low voltage systems that require wide bandwidth such as video, communications and instrumentation. It is used in set-top boxes, surveillance video systems, battery-powered instruments, analogue to digital converter interface, CCD imaging systems, video routing and switching systems, digital cameras, video-on-demand and video line driver.
- Low cost and high speed, 210MHz -3dB bandwidth
- Operating temperature range from -40°C to +85°C
- 55MHz 0.1dB gain flatness and a 485V/µs slew rate
- Disable mode places outputs in high-impedance state
- Input common-mode range extends beyond VEE
- Low differential gain/phase is 0.02%/0.08°
- Low distortion at 5MHz is -65dBc SFDR, -63dB total harmonic distortion
- Input offset voltage of 0.2mV at TA = +25°C
- Analog-to-Digital Converter Interface; Battery-Powered Instruments; CCD Imaging Systems; Digital Cameras; Set-Top Boxes;
- Surveillance Video Systems; Video Line Driver; Video Routing and Switching Systems; Video-on-Demand
应用
信号处理
警告
Market demand for this product has caused an extension in leadtimes. Delivery dates may fluctuate. Product exempt from discounts.
产品信息
技术文档 (1)
CAD 下载
--请选择...
✔
--请选择...
×
条款
CAD Models - Notice
CAD Models and drawings are provided to you on a revocable limited licence for your internal use only but remain the property of the manufacturer who retain all intellectual property rights and ownership. They are provided to assist you in decision making and as design guide but are not guaranteed to be error free, accurate or up to date and is not intended to be taken as advice.
Use of these CAD models and other options provided are downloaded and used entirely at your own risk and by continuing you confirm acceptance of the above.
包装类型
切割卷带
347 有货 需要更多？
×
您现在可以预订货品了 订购所需的数量并按正常方式结算。目前无法交付的数量将列入延期交货订单中，并在到货后立即发货。
交付周期内有额外库存， 交付周期大约为 22-6-13
347 UK 有库存，可在 4-5 个工作日内交货
| 数量 | 单价（含增值税） | 您所支付金额（含增值税） |
|---|---|---|
| 1+ | CNY19.05 (CNY21.53) | ( ) |
| 10+ | CNY17.09 (CNY19.31) | ( ) |
| 25+ | CNY16.06 (CNY18.15) | ( ) |
| 100+ | CNY13.59 (CNY15.36) | ( ) |
| 250+ | CNY12.65 (CNY14.29) | ( ) |
| 500+ | CNY11.88 (CNY13.42) | ( ) |
| 1000+ | CNY11.63 (CNY13.14) | ( ) |
| 2500+ | CNY10.85 (CNY12.26) | ( ) |
| 5000+ | CNY10.69 (CNY12.08) | ( ) |
定价不可用。 请联系客户服务。
筛选器工具