您已在下面突出显示的字段中输入包含无效字符的值。 请仅使用有效字符修改您的选择。
产品可能与您的搜索条件并不完全匹配
您买过此产品。
在订单历史记录中查看
MAX4721EBL+T
模拟开关, CMOS, 2 放大器, SPST, 4.5 ohm, 1.8V 至 5.5V, UCSP, 9 引脚
产品概述
The MAX4721EBL+T is a dual SPST analogue switch in 9 pin UCSP package. This low voltage, low on-resistance (RON) analogue switch operates from a single 1.8V to 5.5V supply. It is designed for USB 1.1 and audio switching applications. The device offers tON of less than 80ns and tOFF less than 40ns at +2.7V. The digital logic inputs are 1.8V logic compatible with 2.7V to 3.6V supply. It has maximum on-resistance of 4.5ohm, maximum on-resistance flatness of 1.2ohm and maximum on-resistance match between channels of 0.3ohm at TA = +25°C with single +3V supply. The MAX4721EBL packaged in a chip scale package (UCSP) which significantly reduces required PC board area. The device is used in battery operated equipments, audio/video signal routing, low voltage data acquisition systems and sample and hold circuits.
- Normally open (NO) switch configuration
- Operating temperature range from -40°C to 85°C
- Less than 2ns differential skew and low distortion of 0.03%
- On-channel -3dB bandwidth of less than 300MHz at TA = +25°C with single +3V supply
- Charge injection of 5pC at TA = +25°C with single +3V supply
- 0.01nA COM off leakage current & 0.01nA COM on-leakage current (TA = +25°C, single +3V supply)
- -55dB high off isolation and -80dB low crosstalk (f = 10MHz, TA = 25°C, single +3V supply)
- Positive supply current of 1µA at TMIN to TMAX
- Rail to rail signal handling
- Audio/Video Signal Routing; Battery-Operated Equipment; Communications Circuits; Low-Voltage Data-Acquisition Systems; Sample-and-Hold Circuits
应用
信号处理, 通信与网络
产品信息
技术文档 (1)
CAD 下载
--请选择...
✔
--请选择...
×
条款
CAD Models - Notice
CAD Models and drawings are provided to you on a revocable limited licence for your internal use only but remain the property of the manufacturer who retain all intellectual property rights and ownership. They are provided to assist you in decision making and as design guide but are not guaranteed to be error free, accurate or up to date and is not intended to be taken as advice.
Use of these CAD models and other options provided are downloaded and used entirely at your own risk and by continuing you confirm acceptance of the above.
包装类型
切割卷带
1,039 有货 需要更多？
×
您现在可以预订货品了 订购所需的数量并按正常方式结算。目前无法交付的数量将列入延期交货订单中，并在到货后立即发货。
交付周期内有额外库存， 交付周期大约为 22-1-31
1,039 UK 有库存，可在 4-5 个工作日内发货
| 数量 | 单价（含增值税） | 您所支付金额（含增值税） |
|---|---|---|
| 1+ | CNY19.13 (CNY21.62) | ( ) |
| 10+ | CNY17.21 (CNY19.45) | ( ) |
| 25+ | CNY16.23 (CNY18.34) | ( ) |
| 100+ | CNY13.83 (CNY15.63) | ( ) |
| 250+ | CNY12.99 (CNY14.68) | ( ) |
| 500+ | CNY11.36 (CNY12.84) | ( ) |
| 1000+ | CNY9.74 (CNY11.01) | ( ) |
定价不可用。 请联系客户服务。
筛选器工具