您已在下面突出显示的字段中输入包含无效字符的值。 请仅使用有效字符修改您的选择。

产品可能与您的搜索条件并不完全匹配

您买过此产品。 在订单历史记录中查看

 
 

MAX4908ETD+T

芯片, 3:1模拟多路复用器, 双路, 0.75R, 1.8V至5.5V, TDFN-14

MAXIM INTEGRATED PRODUCTS MAX4908ETD+T
×

图片仅用于图解说明,详见产品说明。

制造商产品编号:
MAX4908ETD+T
库存编号
2513934
查看所有技术文档

产品概述

The MAX4908ETD+T is a dual 3:1 clickless audio multiplexer with negative-signal handling in 14 pin TDFN package. It allows signals as low as VCC - 5.5V to pass through without distortion. This analogue multiplexer has a low on-resistance (0.38ohm), low supply current and operate from a single supply. It has shunt resistors on all input terminals, shunt resistor feature reduces click-and-pop sounds by automatically discharging capacitance at input terminal when they are not connected. A break before make feature further reduces popping. It use two digital control inputs CB1 and CB2 to switch between signals. The digital control inputs can accept up to +5.5V independent of supply voltage. It is used in cell phones, PDAs and handheld devices, notebook computers and MP3 players.
  • Supply voltage range is 1.8V to 5.5V
  • Operating temperature range from -40°C to 85°C
  • Distortion free negative signal throughput down to VCC - 5.5V
  • High PSRR reduces supply noise
  • Channel to channel matching of 0.1ohm (max)
  • On-resistance flatness is 0.35ohm (max)
  • Crosstalk of -70dB (typ) at 20KHz
  • Off-isolation of -80dB (typ) at 20KHz
  • Total harmonic distortion is 0.02% (typ)
  • Leakage current is 50nA, supply current is 50nA

应用

信号处理, 便携式器材, 消费电子产品

警告

Market demand for this product has caused an extension in leadtimes. Delivery dates may fluctuate. Product exempt from discounts.

产品信息

想要查看类似产品?只需在下方选择所需属性并点击按钮 ×


:
3:1

:
2电路

:
0.75ohm

:
1.8V 至 5.5V

:
TDFN

:
14引脚

:
-40°C

:
85°C

:
-

:
-

:
MSL 1 -无限制
查找类似产品 选择并修改以上属性即可查找类似产品。

技术文档 (1)

CAD 下载

×

条款

CAD Models - Notice
CAD Models and drawings are provided to you on a revocable limited licence for your internal use only but remain the property of the manufacturer who retain all intellectual property rights and ownership. They are provided to assist you in decision making and as design guide but are not guaranteed to be error free, accurate or up to date and is not intended to be taken as advice.
Use of these CAD models and other options provided are downloaded and used entirely at your own risk and by continuing you confirm acceptance of the above.

接受 取消
包装类型 切割卷带

843 有货 需要更多?

843 UK 有库存,可在 4-5 个工作日内交货

CNY31.84 ( CNY35.98  含增值税)

定价不可用。 请联系客户服务

包装规格:
单件(切割供应)
多件: 1 最低: 1
数量 单价(含增值税) 您所支付金额(含增值税)
 
 
1+ CNY31.84 (CNY35.98)
优惠价格
合约价格
仅限网络价格
仅限网络合约价格
  ( )
10+ CNY28.60 (CNY32.32)
优惠价格
合约价格
仅限网络价格
仅限网络合约价格
  ( )
25+ CNY27.04 (CNY30.56)
优惠价格
合约价格
仅限网络价格
仅限网络合约价格
  ( )
100+ CNY23.43 (CNY26.48)
优惠价格
合约价格
仅限网络价格
仅限网络合约价格
  ( )
250+ CNY22.23 (CNY25.12)
优惠价格
合约价格
仅限网络价格
仅限网络合约价格
  ( )
500+ CNY19.95 (CNY22.54)
优惠价格
合约价格
仅限网络价格
仅限网络合约价格
  ( )
1000+ CNY18.03 (CNY20.37)
优惠价格
合约价格
仅限网络价格
仅限网络合约价格
  ( )
 
 

定价不可用。 请联系客户服务

No longer stocked:: No Longer Manufactured::
添加到购物篮 添加到购物篮 预订
添加
受限制物品
添加部件编号/注释行
总价:
总价: ( )
总价: --