您已在下面突出显示的字段中输入包含无效字符的值。 请仅使用有效字符修改您的选择。
产品可能与您的搜索条件并不完全匹配
您买过此产品。
在订单历史记录中查看
MAX4968AECM+
模拟开关, 双向, 16 放大器, SPST, 34 ohm, 2.375V 至 5.5V, LQFP, 48 引脚
产品概述
The MAX4968AECM+ is a 16-channel, linear, high voltage analogue switch in 48 pin LQFP package. This bidirectional SPST switch with 18ohm(typ) on-resistance, it is ideal for use in applications requiring high voltage switching controlled by a low voltage control signal such as ultrasound imaging and printers. It provides integrated 40Kohm (typ) bleed resistors on each switch terminal to discharge capacitive loads. Using HVCMOS technology, this switch combines high voltage bilateral MOS switches and low power CMOS logic to provide efficient control of high voltage analogue signals. It is pin to pin compatible with the MAX14803 and Supertex HV2701. In a typical ultrasound application, this device do not require a dedicated high voltage supply that implies a significant simplification of system requirement. The negative voltage supply can be shared with the transmitter and positive voltage supply is typically +10V. It is used in nondestructive testing (NDT)/industrial.
- Supply voltage range is 2.375V to 5.5V, 25MHz serial interface
- Operating temperature range from -40°C to 85°C, shunt (bleed) resistors on outputs
- Latch free, SOI HVCMOS process technology for high performance and robustness
- No dedicated high voltage supplies required, extended input range up to 210Vp-p
- RON flatness is in entire input range, daisy-chainable serial interface
- Low power dissipation, low charge injection and voltage spike
- 2nd harmonic distortion < -45dB at 2MHz ± 90V pulse, -80dB (typ) off-isolation at 5MHz (50 ohm)
- Low parasitic capacitance provides high bandwidth
- DC to 30MHz small signal analogue bandwidth (CLOAD = 200pF)
- 500kHz to 20MHz high signal analogue bandwidth (CLOAD = 200pF)
应用
信号处理
警告
Market demand for this product has caused an extension in leadtimes. Delivery dates may fluctuate. Product exempt from discounts.
产品信息
技术文档 (1)
CAD 下载
--请选择...
✔
--请选择...
×
条款
CAD Models - Notice
CAD Models and drawings are provided to you on a revocable limited licence for your internal use only but remain the property of the manufacturer who retain all intellectual property rights and ownership. They are provided to assist you in decision making and as design guide but are not guaranteed to be error free, accurate or up to date and is not intended to be taken as advice.
Use of these CAD models and other options provided are downloaded and used entirely at your own risk and by continuing you confirm acceptance of the above.
可延期交货
筛选器工具