您已在下面突出显示的字段中输入包含无效字符的值。 请仅使用有效字符修改您的选择。
产品可能与您的搜索条件并不完全匹配
您买过此产品。
在订单历史记录中查看
MAX5258EEE+
数模转换器, 低功率, 缓冲电压输出, 8 bit, SPI, 4.5V 至 5.5V, QSOP, 16 引脚
产品概述
The MAX5258EEE+ is a low power, 8bit octal digital to analogue converter (DAC) with rail to rail output buffers in 16 pin QSOP package. This +5V single supply, digital serial input, voltage output DAC is compatible with SPI, QSPI and MICROWIRE interfaces. Internal precision buffers swing rail to rail and reference input range extends from ground to positive supply. A 16bit input shift register is followed by eight 8bit input registers and eight 8bit DAC registers. The 16bit serial word consists of two don't care bits, three address bits, three control bits and eight data bits. The input and DAC registers can both be updated independently or simultaneously with single software command. The asynchronous control input (active-low LDAC) provides simultaneous updating of all eight DAC registers. A buffered digital data output allows daisy chaining of serial devices. The MAX5258 is used in digital gain and offset adjustment, programmable attenuators and current sources.
- Supply voltage range is 4.5V to 5.5V
- Operating temperature range from -40°C to 85°C
- Low power shutdown mode
- Integral nonlinearity (INL) of ±0.1LSB and differential nonlinearity (DNL) of ±0.05LSB (monotonic)
- Low supply current of 1.4mA and shutdown supply current of 0.45µA
- Multiplying bandwidth of 700KHz and wideband amplifier noise of 16µV
- Ground to VDD reference input range and serial interface is double buffered
- Voltage output slew rate of 0.55V/µs and output settling time of 10µs
- ±2.5mV zero code error, ±10µV/°C zero code temperature coefficient & 0.02LSB supply rejection
- ±1mV full scale error, 0.25LSB supply rejection and ±10µV/°C full scale temperature coefficient
应用
信号处理, 便携式器材
警告
Market demand for this product has caused an extension in leadtimes. Delivery dates may fluctuate. Product exempt from discounts.
产品信息
技术文档 (1)
CAD 下载
--请选择...
✔
--请选择...
×
条款
CAD Models - Notice
CAD Models and drawings are provided to you on a revocable limited licence for your internal use only but remain the property of the manufacturer who retain all intellectual property rights and ownership. They are provided to assist you in decision making and as design guide but are not guaranteed to be error free, accurate or up to date and is not intended to be taken as advice.
Use of these CAD models and other options provided are downloaded and used entirely at your own risk and by continuing you confirm acceptance of the above.
109 有货 需要更多？
×
您现在可以预订货品了 订购所需的数量并按正常方式结算。目前无法交付的数量将列入延期交货订单中，并在到货后立即发货。
交付周期内有额外库存， 交付周期大约为 22-10-17
89 Shanghai 有货，可次日送达（在 CST 下午 4.30 之前订购）
20 UK 有库存，可在 4-5 个工作日内交货
20 UK 有库存，可在 4-5 个工作日内交货
筛选器工具