您已在下面突出显示的字段中输入包含无效字符的值。 请仅使用有效字符修改您的选择。
产品可能与您的搜索条件并不完全匹配
您买过此产品。
在订单历史记录中查看
MAX5724AUP+
数模转换器, 超小缓冲输出, 内部参考基准, 10 bit, SPI, 2.7V 至 5.5V, TSSOP, 20 引脚
产品概述
The MAX5724AUP+ is an ultra small, 8-channel, 10bit buffered output voltage DAC with internal reference and SPI interface in 20 pin TSSOP package. This DAC include output buffers and an internal 3ppm/°C reference selectable 2.048V, 2.5V or 4.096V voltages. A precision external reference input allows rail to rail operation and a 100Kohm load to an external reference. It has a fast 50MHz, 4 wire SPI/QSPI/MICROWIRE/DSP compatible serial interface that operates at clock rates up to 50MHz. On power-up, the device reset the DAC outputs to zero or midscale based on the status of M/ Z̅ logic input, providing flexibility for a variety of control applications. The internal reference is initially powered down to allow use of an external reference. Typical applications include programmable voltage and current sources, gain and offset adjustment, automatic tuning and optical control, power amplifier control and biasing, process control and servo loops, data acquisition.
- Wide supply voltage range of 2.7V to 5.5V with extremely low power consumption of less than 6mW
- Operating temperature range from -40°C to 125°C
- Integral nonlinearity is ±0.05LSB and differential nonlinearity is ±0.05LSB
- Low supply current of less than 250µA per channel
- Gain error is ±0.1%FS and low offset error of ±0.5mV
- Settling time is 2.6µs
- Output directly drives 2Kohm loads
- Separate 1.8V to 5.5V VDDIO power supply input
- Programmable interface watchdog timer
- Load DAC logic input and clear logic input for asynchronous DAC control
应用
信号处理, 工业
产品信息
技术文档 (2)
CAD 下载
--请选择...
✔
--请选择...
×
条款
CAD Models - Notice
CAD Models and drawings are provided to you on a revocable limited licence for your internal use only but remain the property of the manufacturer who retain all intellectual property rights and ownership. They are provided to assist you in decision making and as design guide but are not guaranteed to be error free, accurate or up to date and is not intended to be taken as advice.
Use of these CAD models and other options provided are downloaded and used entirely at your own risk and by continuing you confirm acceptance of the above.
已停产
| 数量 | 单价（含增值税） | 您所支付金额（含增值税） |
|---|---|---|
| 1+ | CNY41.01 (CNY46.34) | ( ) |
| 10+ | CNY37.10 (CNY41.92) | ( ) |
| 25+ | CNY35.44 (CNY40.05) | ( ) |
定价不可用。 请联系客户服务。
筛选器工具