您已在下面突出显示的字段中输入包含无效字符的值。 请仅使用有效字符修改您的选择。

产品可能与您的搜索条件并不完全匹配

您买过此产品。 在订单历史记录中查看

 
 

MAX6066BEUR+T

电压参考系列-固定, 2.5V参考, ± 6ppm/°C, SOT-23-3

MAXIM INTEGRATED / ANALOG DEVICES MAX6066BEUR+T
×
×

图片仅用于图解说明,详见产品说明。

制造商产品编号:
MAX6066BEUR+T
库存编号
2511320
产品范围
MAX6066
查看所有技术文档

产品范围选择器 (MAX6066)

查看全系列相关产品

产品概述

The MAX6066BEUR+T is a precision, low dropout, micropower voltage reference in 3 pin SOT-23 package. This three terminal device features a curvature correction circuit and laser trimmed thin film resistors result in a very low temperature coefficient of ±6ppm/°C and an initial accuracy of 0.4%. It typically draws 90µA of supply current and can source 5mA or sink 2mA of load current. This device offers a supply current that is virtually independent of the supply voltage (8µA/V variation) and do not require an external resistor. It is an internal compensated device which does not require an external compensation capacitor. Eliminating the external compensation capacitor saves valuable board area in space critical applications. The low dropout voltage, independent supply voltage and ultra low supply current makes this device ideal for battery operated and high performance low voltage systems.
  • Output voltage of 2.5V
  • High output current
  • Supply voltage range from VOUT + 0.2V to 12.6V
  • Operating temperature range from -40°C to 85°C
  • Stable with capacitive loads
  • Maximum dropout voltage is 200mV at 1mA load current
  • Noise is 30µVP-P at 0.1Hz to 10Hz

应用

电源管理, 便携式器材

警告

Market demand for this product has caused an extension in leadtimes. Delivery dates may fluctuate. Product exempt from discounts.

产品信息

想要查看类似产品?只需在下方选择所需属性并点击按钮 ×


:
串行-固定

:
MAX6066

:
2.5V

:
0.4%

:
± 6ppm/°C

:
SOT-23

:
3引脚

:
-40°C

:
85°C

:
-

:
MSL 1 -无限制
查找类似产品 选择并修改以上属性即可查找类似产品。

技术文档 (1)

CAD 下载

×

条款

CAD Models - Notice
CAD Models and drawings are provided to you on a revocable limited licence for your internal use only but remain the property of the manufacturer who retain all intellectual property rights and ownership. They are provided to assist you in decision making and as design guide but are not guaranteed to be error free, accurate or up to date and is not intended to be taken as advice.
Use of these CAD models and other options provided are downloaded and used entirely at your own risk and by continuing you confirm acceptance of the above.

接受 取消
包装类型 切割卷带

2,684 有货 需要更多?

259 Shanghai 有库存,可在下一个工作日发货 (在 CST 下午 4.30 之前订购)
2,425 UK 有库存,可在 4-5 个工作日内发货

由于市场条件的影响,交货时间仅供一般指导,可能会在短时间内发生变化

CNY14.60 ( CNY16.50  含增值税)

定价不可用。 请联系客户服务

包装规格:
单件(切割供应)
多件: 1 最低: 1
数量 单价(含增值税) 您所支付金额(含增值税)
 
 
1+ CNY14.60 (CNY16.50)
优惠价格
合约价格
仅限网络价格
仅限网络合约价格
  ( )
 
 

定价不可用。 请联系客户服务

No longer stocked:: No Longer Manufactured::
添加到购物篮 添加到购物篮 预订
添加
受限制物品
添加部件编号/注释行
总价:
总价: ( )
总价: --