MAX6652AUB+

MAX6652AUB+ is a temperature sensor and system monitor. This system supervisor monitors multiple power-supply voltages, including its own, and also features an on-board temperature sensor. Voltages and temperature are converted to an 8-bit code using an analogue-to-digital converter (ADC). A multiplexer automatically sequences through the voltage and temperature measurements. The digitized signals are then stored in registers and compared to the over/under threshold limits programmed over the 2-wire serial interface. When a temperature measurement exceeds the programmed threshold, or when an input voltage falls outside the programmed voltage limits, the MAX6652 generates a latched interrupt output active-low ALERT. Three interrupt modes are available for temperature excursions: default mode, one-time interrupt mode, and comparator mode. It is used in applications such as workstations, servers, networking, telecommunications.

• Monitors local temperature, user-programmable voltage and temperature thresholds
• Alert function with ability to respond to SMB alert response address
• Supply voltage range from +2.7V to +5.5V
• Supply current is 200µA typical at (VCC = +5V, TA = +25°C)
• Accuracy is ±2°C maximum at (VCC = +5V, TA = +25°C)
• Total unadjusted error is 1% typical at (VIN <gt/> 10LSB, VCC = +5V, TA = +25°C)
• Differential nonlinearity is 1LSB maximum at (VIN <gt/> 10LSB, VCC = +5V, TA = +25°C)
• Serial clock frequency is 400KHz maximum at (VCC = +5V, TA = +25°C)
• Operating temperature range from -40°C to +125°C
• 10-pin µMAX package

注释

ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party