您已在下面突出显示的字段中输入包含无效字符的值。 请仅使用有效字符修改您的选择。
产品可能与您的搜索条件并不完全匹配
您买过此产品。
在订单历史记录中查看
MAX6701ATKA+T
监控器, 手动, 推挽式, 3监视器, 1.2 V至5.5 V电源, 200 ms延迟, SOT-23-8
产品概述
The MAX6701ATKA+T from Maxim Integrated Products is a low voltage, µP supervisor with power-fail in/out, manual reset and watchdog timer in 8 pin SOT-23 package. It reduces the complexity and components required to monitor power supply functions in µP systems and significantly improve system reliability and accuracy compared to separate ICs or discrete components. It provides four functions such as, a reset output during power-up, power-down and brownout conditions, an independent watchdog output that goes low if the watchdog input has not been toggled within 1.6s, a 0.62V threshold detector for power-fail warning and an active-low manual reset input. It offers several pin-out options to accommodate a variety of multivoltage microprocessor supervision applications. It is used in computers, controllers, intelligent instruments, critical µP power monitoring, white goods, networking and telecommunications applications.
- Operating voltage range is 1.2V to 5.5V at TA = -40°C to +125°C
- Active-low WDO deasserts when active-low MR is pulled low
- Active low push-pull reset output, 60ppm/°C reset threshold temperature coefficient
- Precision monitoring of +5V, +3.3V, +3V and +2.5V supply voltages
- Reset valid to VCC = 1V, immune to short falling VCC transients
- Monitors 3 supply voltages (one fixed threshold and two adjustable) to drive a single reset output
- Low cost, few external components, operating temperature range from -40°C to 125°C
- VCC reset threshold (VCC falling) of 3.08V at TA = -40°C to +85°C
- Reset timeout period of 200ms at TA = -40°C to +85°C
- Dual adjustable reset input for triple voltage monitoring
应用
系统监控, 消费电子产品, 便携式器材
警告
Market demand for this product has caused an extension in leadtimes. Delivery dates may fluctuate. Product exempt from discounts.
产品信息
技术文档 (1)
CAD 下载
--请选择...
✔
--请选择...
×
条款
CAD Models - Notice
CAD Models and drawings are provided to you on a revocable limited licence for your internal use only but remain the property of the manufacturer who retain all intellectual property rights and ownership. They are provided to assist you in decision making and as design guide but are not guaranteed to be error free, accurate or up to date and is not intended to be taken as advice.
Use of these CAD models and other options provided are downloaded and used entirely at your own risk and by continuing you confirm acceptance of the above.
包装类型
切割卷带
3,125 有货 需要更多？
×
您现在可以预订货品了 订购所需的数量并按正常方式结算。目前无法交付的数量将列入延期交货订单中，并在到货后立即发货。
交付周期内有额外库存， 交付周期大约为 23-9-25
3,125 英国 有库存，可在 5-6 个工作日内发货
由于市场条件的影响，交货时间仅供一般指导，可能会在短时间内发生变化
| 数量 | 价钱 (不含税) (含税) | 您所支付金额（含增值税） (不含税) |
|---|---|---|
| 1+ | CNY31.48 CNY35.5724 | ( ) |
| 10+ | CNY28.25 CNY31.9225 | ( ) |
| 25+ | CNY26.70 CNY30.171 | ( ) |
| 100+ | CNY23.15 CNY26.1595 | ( ) |
| 250+ | CNY21.96 CNY24.8148 | ( ) |
| 500+ | CNY19.70 CNY22.261 | ( ) |
| 2500+ | CNY19.09 CNY21.5717 | ( ) |
| 5000+ | CNY18.71 CNY21.1423 | ( ) |
定价不可用。 请联系客户服务。
筛选器工具