您已在下面突出显示的字段中输入包含无效字符的值。 请仅使用有效字符修改您的选择。
产品可能与您的搜索条件并不完全匹配
您买过此产品。
在订单历史记录中查看
MAX6705ATKA+T
监控器, 带看门狗, 手动, 推挽式, 2监视器, 1.2 V至5.5 V, 200 ms延迟的监视器, SOT-23-8
产品概述
The MAX6705ATKA+T from Maxim Integrated Products is a low voltage, µP supervisor with power fail in/out, manual reset and watchdog timer in 8 pin SOT-23 package. It reduces the complexity and components required to monitor power supply functions in µP systems. It provides four functions such as, a reset output during power-up, power-down and brownout conditions, an independent watchdog output that goes low if the watchdog input has not been toggled within 1.6s, a 0.62V threshold detector for power fail warning and an active-low manual reset input. MAX6705A monitors a single-supply voltage to drive a single reset output and include an independent adjustable power-fail-in/power-fail-out comparator, a manual reset input and a watchdog timer with an independent output. It is used in computers, controllers, intelligent instruments, critical µP power monitoring, white goods, networking and telecommunications applications.
- Operating voltage range is 1.2V to 5.5V, improves system reliability and accuracy
- Operating temperature of -40°C to +125°C, active-low WDO deasserts when active-low MR is pulled low
- Active-low push-pull reset output, 60ppm/°C reset threshold temperature coefficient
- Precision monitoring of +5V, +3.3V, +3V and +2.5V supply voltages
- Reset valid to VCC = 1V
- Immune to short falling VCC transients
- Low cost, few external components
- Reset threshold of 3.08V at TA = -40°C to +85°C
- Reset timeout period of 200ms at TA = -40°C to +85°C
- Power-fail input with independent output, monitors inputs down to 0.62V
应用
系统监控, 便携式器材, 工业, 通信与网络, 消费电子产品
警告
Market demand for this product has caused an extension in leadtimes. Delivery dates may fluctuate. Product exempt from discounts.
产品信息
技术文档 (1)
CAD 下载
--请选择...
✔
--请选择...
×
条款
CAD Models - Notice
CAD Models and drawings are provided to you on a revocable limited licence for your internal use only but remain the property of the manufacturer who retain all intellectual property rights and ownership. They are provided to assist you in decision making and as design guide but are not guaranteed to be error free, accurate or up to date and is not intended to be taken as advice.
Use of these CAD models and other options provided are downloaded and used entirely at your own risk and by continuing you confirm acceptance of the above.
包装类型
切割卷带
181 有货 需要更多？
×
您现在可以预订货品了 订购所需的数量并按正常方式结算。目前无法交付的数量将列入延期交货订单中，并在到货后立即发货。
交付周期内有额外库存， 交付周期大约为 22-9-5
181 UK 有库存，可在 4-5 个工作日内交货
| 数量 | 单价（含增值税） | 您所支付金额（含增值税） |
|---|---|---|
| 1+ | CNY30.44 (CNY34.40) | ( ) |
| 10+ | CNY27.35 (CNY30.91) | ( ) |
| 25+ | CNY25.85 (CNY29.21) | ( ) |
| 100+ | CNY22.41 (CNY25.32) | ( ) |
| 250+ | CNY21.26 (CNY24.02) | ( ) |
| 500+ | CNY19.70 (CNY22.26) | ( ) |
定价不可用。 请联系客户服务。
筛选器工具