您已在下面突出显示的字段中输入包含无效字符的值。 请仅使用有效字符修改您的选择。

产品可能与您的搜索条件并不完全匹配

您买过此产品。 在订单历史记录中查看

 
 

MAX6965ATE+

发光二极管驱动器, 2V 至 3.6V 输入, 9 输出, 7V/50 mA 输出, TQFN-16

MAXIM INTEGRATED PRODUCTS MAX6965ATE+
×

图片仅用于图解说明,详见产品说明。

制造商产品编号:
MAX6965ATE+
库存编号
2516034
查看所有技术文档

产品信息

想要查看类似产品?只需在下方选择所需属性并点击按钮 ×


:
-

:
9输出

:
50mA

:
7V

:
TQFN

:
16引脚

:
2V

:
3.6V

:
-

:
-40°C

:
125°C

:
-

:
-

:
MSL 1 -无限制
查找类似产品 选择并修改以上属性即可查找类似产品。

技术文档 (2)

CAD 下载

×

条款

CAD Models - Notice
CAD Models and drawings are provided to you on a revocable limited licence for your internal use only but remain the property of the manufacturer who retain all intellectual property rights and ownership. They are provided to assist you in decision making and as design guide but are not guaranteed to be error free, accurate or up to date and is not intended to be taken as advice.
Use of these CAD models and other options provided are downloaded and used entirely at your own risk and by continuing you confirm acceptance of the above.

接受 取消

产品概述

The MAX6965ATE+ is a 9-output LED driver with intensity control and hot insertion protection in 16 pin TQFN package. This I2C compatible serial interfaced peripheral device provides microprocessors with nine additional output ports. All outputs are capable of driving LEDs or providing logic outputs with external resistive pull-up up to 7V. An 8bit PWM current control is also integrated. Four of the bits are global control and apply to all LED outputs to provide coarse adjustment of current from fully off to fully on with 14 intensity steps. Additionally each output then has an individual 4bit control which further divides globally set current into 16 more steps. Each output has independent blink timing with two blink phases.
  • Operating supply voltage range from 2V to 3.6V
  • Operating temperature range from -40°C to 125°C
  • 400Kbps, 2-wire serial interface, 5.5V tolerant
  • Each output is an open-drain current sinking output rated to 50mA at 7V
  • Global 16 step intensity control plus individual 16 step intensity controls
  • Two phase LED blinking
  • Active-low RST input clears serial interface and restores power-up default state
  • Supply current (interface running, PWM enabled) of 51µA at TA = +25°C, fSCL = 400KHz
  • Standby current of 1.2µA at TA = +25°C
  • PWM clock frequency of 32KHz

警告

Market demand for this product has caused an extension in leadtimes. Delivery dates may fluctuate. Product exempt from discounts.

可延期交货

交付周期内将会有更多库存,大约为 22-10-10

有货时请通知我

CNY29.39 ( CNY33.21  含增值税)

定价不可用。 请联系客户服务

包装规格:
每个
多件: 1 最低: 1
数量 单价(含增值税) 您所支付金额(含增值税)
 
 
1+ CNY29.39 (CNY33.21)
优惠价格
合约价格
仅限网络价格
仅限网络合约价格
  ( )
10+ CNY26.42 (CNY29.85)
优惠价格
合约价格
仅限网络价格
仅限网络合约价格
  ( )
25+ CNY24.97 (CNY28.22)
优惠价格
合约价格
仅限网络价格
仅限网络合约价格
  ( )
100+ CNY20.53 (CNY23.20)
优惠价格
合约价格
仅限网络价格
仅限网络合约价格
  ( )
250+ CNY18.42 (CNY20.81)
优惠价格
合约价格
仅限网络价格
仅限网络合约价格
  ( )
500+ CNY18.37 (CNY20.76)
优惠价格
合约价格
仅限网络价格
仅限网络合约价格
  ( )
 
 

定价不可用。 请联系客户服务

No longer stocked:: No Longer Manufactured::
添加到购物篮 添加到购物篮 预订
添加
受限制物品
添加部件编号/注释行
总价:
总价: ( )
总价: --