您已在下面突出显示的字段中输入包含无效字符的值。 请仅使用有效字符修改您的选择。
产品可能与您的搜索条件并不完全匹配
您买过此产品。
在订单历史记录中查看
MAX7034AUI/V+
射频远程无钥门禁, 300MHz至450MHz, ASK, -114dBm, 66Kbps, 4.5V至5.5V电源, TSSOP-28
产品概述
The MAX7034AUI/V+ from Maxim Integrated Products is a 315MHz/434MHz ASK superheterodyne receiver in 28 pin TSSOP package. This fully integrated low power CMOS superheterodyne receiver is ideal for receiving amplitude shift keyed (ASK) data in 300MHz to 450MHz frequency range (including popular 315MHz and 433.92MHz frequencies). With few external components and low-current power-down mode, it is ideal for cost sensitive and power sensitive applications typical in automotive and consumer markets. The MAX7034 consists of a low noise amplifier (LNA), fully differential image-rejection mixer, an on-chip phase-locked loop (PLL) with integrated voltage-controlled oscillator (VCO), a 10.7MHz IF limiting amplifier stage with received-signal-strength indicator (RSSI) and analogue baseband data-recovery circuitry. Applications include automotive remote keyless entry, security systems, garage door openers, home automation, remote controls, local telemetry and wireless sensors.
- Supply voltage range is 4.5V to 5.5V, automotive AEC-Q100 grade 1 qualified
- Operating temperature range from -40°C to 125°C
- Selectable image rejection centre frequency and selectable x64 or x32 fLO/fXTAL ratio
- RF sensitivity of -114dBm
- Low (< 6.7mA) operating supply current
- Less than 3.0µA low current power-down mode for efficient power cycling
- Start-up time is 250µs
- Built-in 44dB RF image rejection
- Excellent receive sensitivity over temperature
- Maximum data rate is 33Kbps (manchester coded), 66Kbps (NRZ coded)
应用
通信与网络, 无线, 安全, 自动化与过程控制, 建筑自动化, 车用
警告
Market demand for this product has caused an extension in leadtimes. Delivery dates may fluctuate. Product exempt from discounts.
产品信息
技术文档 (2)
CAD 下载
--请选择...
✔
--请选择...
×
条款
CAD Models - Notice
CAD Models and drawings are provided to you on a revocable limited licence for your internal use only but remain the property of the manufacturer who retain all intellectual property rights and ownership. They are provided to assist you in decision making and as design guide but are not guaranteed to be error free, accurate or up to date and is not intended to be taken as advice.
Use of these CAD models and other options provided are downloaded and used entirely at your own risk and by continuing you confirm acceptance of the above.
筛选器工具