有货时请通知我
数量 | 价钱 (含税) |
---|---|
1+ | CNY104.460 (CNY118.0398) |
10+ | CNY77.010 (CNY87.0213) |
25+ | CNY75.690 (CNY85.5297) |
100+ | CNY69.980 (CNY79.0774) |
300+ | CNY68.590 (CNY77.5067) |
500+ | CNY67.190 (CNY75.9247) |
产品信息
产品概述
The MAX706ATESA+ is a +3V voltage monitoring low cost microprocessor (μP) supervisory circuit in 8 pin NSOIC package. This device reduces complexity and number of components required to monitor +3V power supply levels in +3V to +5V μP systems. It significantly improves system reliability and accuracy compared to separate ICs or discrete components. This device provides reset output during power-up, power-down and brown-out conditions. An independent watchdog output will goes low if watchdog input has not been toggled within 1.6s. The MAX706AT provides 1.25V threshold detector for power fail warning, low battery detection or for monitoring power supply other than main supply and active-low manual reset input. The watchdog timer function for MAX706AT disables when WDI input is left open or connected to a high impedance state of a low leakage tri-state output. It is used in computers, controllers, intelligent instruments, critical μP power monitoring and battery powered equipments.
- Supply voltage range from 1.2V to 5.5V
- Operating temperature range from -40°C to 85°C
- Active-low, push-pull reset output signal
- Reset threshold of 3.08V and reset time delay of 200ms
- Debounced TTL/CMOS compatible manual reset input
- Quiescent current of 100μA
- Watchdog timeout period of 1.6s at VCC = 3.3V
- Supply current of 90μA at VCC <lt/> 3.6V
注释
ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party
技术规格
-
1Monitors
5.5V
NSOIC
表面安装
-40°C
-
MSL 1 -无限制
-
3.08V
3.08V
1.2V
有功-低/推拉
8引脚
200ms
85°C
-
No SVHC (21-Jan-2025)
NSOIC
法律与环境
进行最后一道重要生产流程所在的地区原产地:Philippines
进行最后一道重要生产流程所在的地区
RoHS
RoHS
产品合规证书