您已在下面突出显示的字段中输入包含无效字符的值。 请仅使用有效字符修改您的选择。
产品可能与您的搜索条件并不完全匹配
您买过此产品。
在订单历史记录中查看
MCP41HV51-103E/ST
易失性数字电位器, 10 kohm, 单, SPI, 线性, ± 20%, 1.8 V
- 制造商:
- MICROCHIP MICROCHIP
- 制造商产品编号:
- MCP41HV51-103E/ST
- 库存编号
- 2362002
- 技术数据表:
- MCP41HV51-103E/ST Datasheet
产品范围选择器 (Single 255-Tap Volatile Digital Pots)
查看全系列相关产品产品概述
The MCP41HV51-103E/ST is a Digital Potentiometer with SPI serial interface and volatile memory. It has dual power rails (analogue and digital). The analogue power rail allows high voltage on the resistor network terminal pins. The analogue voltage range is determined by the V+ and V- voltages. The maximum analogue voltage is 36V, while the operating analogue output minimum specifications are specified from either 10 or 20V. As the analogue supply voltage becomes smaller, the analogue switch resistances increase, which effect certain performance specifications. The system can be implemented as dual rail (±18V) relative to the digital logic ground (DGND). The device also has a Write Latch (WLAT) function, which will inhibit the volatile wiper register from being updated (latched) with the received data, until the WLAT pin is low. This allows the application to specify a condition where the volatile wiper register is updated (such as zero crossing).
- Terminal control (TCON) register
- High-voltage analogue support
- Single resistor network
- High terminal/wiper current (IW) support
- Zero-scale to full-scale wiper operation
- Write latch (WLAT) pin to control update of volatile wiper register (such as zero crossing)
- power-ON reset/brown-out reset
- 500kHz Typical bandwidth (-3dB)
- 3µA Typical serial interface inactive current
- 75R Typical low wiper resistance
应用
信号处理
产品信息
技术文档 (3)
可延期交货
×
您现在可以预订货品了 订购所需的数量并按正常方式结算。目前无法交付的数量将列入延期交货订单中,并在到货后立即发货。 只有在发货后才会收取您的费用。
将于 21-3-30 再提供 384 件
将于 21-6-21 再提供 384 件
数量 | 单价(含增值税) | 您所支付金额(含增值税) |
---|---|---|
1+ | CNY10.37 (CNY11.72) | ( ) |
25+ | CNY8.66 (CNY9.79) | ( ) |
100+ | CNY7.83 (CNY8.85) | ( ) |
定价不可用。 请联系客户服务。
筛选器工具