MP24833-AGN-Z

MP24833-A is a 55V, 3A, white LED driver suitable for step-down, inverting step-up/step-down and step-up applications. The MP24833-A achieves 3A of output current with excellent load and line regulation over a wide input supply range. Current mode operation provides a fast transient response and eases loop stabilization. Full protection features include thermal shutdown, cycle-by-cycle peak current limiting, open-string protection and output short-circuit protection (SCP). It incorporates both DC and PWM dimming into a single control pin. The separate input reference ground pin allows for direct enable and/or dimming control for a positive-to-negative power conversion. The MP24833-A requires a minimal number of readily available, standard, external components and is available in a SOIC-8 EP package. Applications include general LED illumination, LCD backlight panels, notebook computers, automotive internal lighting, portable multimedia players and portable GPS devices.

• Unique step-up/step-down operation (buck-boost mode)
• Wide 4.5V to 55V operating input range for step-down applications (buck mode)
• 0.15ohm internal power MOSFET switch
• Fixed 210KHz switching frequency
• Analog and PWM dimming, 0.2V reference voltage
• 6μA shutdown mode, no minimum number of LEDs required
• Stable with low ESR output ceramic capacitors
• Cycle-by-cycle over current protection (OCP)
• Thermal shutdown protection, open-string protection

注释

MPS部件编号结尾”-P”和”-Z”为相同的部件。”P”和”Z”仅代表卷轴尺寸。