您已在下面突出显示的字段中输入包含无效字符的值。 请仅使用有效字符修改您的选择。

产品可能与您的搜索条件并不完全匹配

您买过此产品。 在订单历史记录中查看

 
 

ONSEMI NCS32100XMNTXG

电感式位置传感器,20位,24位,2.75V至5.5V输入,QFN-40

ONSEMI NCS32100XMNTXG
×

图片仅用于图解说明,详见产品说明。

制造商:
ONSEMI ONSEMI
制造商产品编号:
NCS32100XMNTXG
库存编号
4079781RL
  • 在上面的文本框中输入您的自定义部件号

Part Number Saved

Part Number Saved

ECAD / MCAD
Supply Frame Models Link
查看所有技术文档

产品概述

NCS32100 is an inductive position sensor with battery backup. It is full featured controller and sensor interface for high resolution, high accuracy angular sensing solutions when paired with a contactless PCB sensor. This device supports static to high-speed applications. This has flexible configuration capabilities allowing for connection to a variety of inductive sensor patterns and offers absolute serial digital output. Inductive sensing techniques have unique advantages over traditional position sensor solutions including but not limited to contaminant insensitivity, mechanical simplification, as well as providing an overall lower cost sensor solution. Typical applications are industrial automation/robotics, motor control/positioning, servo applications.
  • Provides absolute position output with programmable index
  • Provides velocity, temperature and backup battery measurements
  • Supports connection to an RS-485 driver (2.5Mbps)
  • Maximum speed at full accuracy is 6000rpm
  • Maximum speed at reduced accuracy is 60000rpm
  • Supply voltage range from 2.75V to 5.5V
  • Full operation current consumption 80mA (typical)
  • Internal programmable M0-ARM MCU provides data interface, configuration, NVM, calibration features
  • QFN40 package

产品信息

想要查看类似产品?只需在下方选择所需属性并点击按钮 ×


:
-

:
-

:
20位, 24位

:
0° 至 360°

:
2.75V 至 5.5V

:
40引脚

:
QFN

:
-40°C 至 +85°C

:
-

查找类似产品 选择并修改以上属性即可查找类似产品。

技术文档 (1)

包装类型 复卷
"
 
提供其他包装选项
切割卷带 :4079781 查看库存

4,953 有货 需要更多?

4,953 英国 有库存,可在 5-6 个工作日内发货

由于市场条件的影响,交货时间仅供一般指导,可能会在短时间内发生变化

CNY163.94 ( 不含税  ) CNY185.2522 ( 含税 )

定价不可用。 请联系客户服务

包装规格:
单件(切割供应)
多件: 1 最低: 10
  • 10+
  • 25+
  • 50+
  • 100+
数量 价钱 (不含税) (含税) 您所支付金额 (不含税)
 
 
10+ CNY163.94 CNY185.2522
优惠价格
合约价格
仅限网络价格
仅限网络合约价格
  ( )
25+ CNY152.47 CNY172.2911
优惠价格
合约价格
仅限网络价格
仅限网络合约价格
  ( )
50+ CNY144.14 CNY162.8782
优惠价格
合约价格
仅限网络价格
仅限网络合约价格
  ( )
100+ CNY141.58 CNY159.9854
优惠价格
合约价格
仅限网络价格
仅限网络合约价格
  ( )
数量 价钱 (不含税) (含税) 您所支付金额 (不含税)
 
 

定价不可用。 请联系客户服务

No longer stocked:: No Longer Manufactured::
添加到购物篮 添加到购物篮 预订
添加
受限制物品
输入行注释
总价: ( 不含税  )
总价: ( 含税 )
总价: --
10 (切割卷带 4079781) x 163.94 = CNY1,639.40
10 (切割卷带 4079781) x 185.2522 = CNY1,852.522
总价: CNY1,639.40 ( 不含税  )
总价: CNY1,852.52 ( 含税 )
10 (复卷 4079781RL) x 163.94 = CNY1,639.40
10 (复卷 4079781RL) x 185.2522 = CNY1,852.522
总价: CNY1,639.40 ( 不含税  )
总价: CNY1,852.52 ( 含税 )
选择您的包装首选项
4079781
"
复卷是针对订购量超过 10 的切割带物品的定制卷装。
注意:较远的仓库可能采用不同的包装类型出货。 请注意查看每个包装选项的发货和交货期信息。