EVL6564H-100W

Demonstration board is based on the new transition mode PFC controller L6564H and implements a 100W, wide-range mains input, PFC pre-conditioner suitable for ballast, adapters, flat screen displays and all SMPS having to meet IEC61000-3-2 or JEITA-MITI regulations. The L6564H is a current mode PFC controller operating in transition mode (TM) which embeds the same features existing in the L6564 with the addition of a high voltage start-up source. These functions make the IC especially suitable for applications that must be compliant with energy saving regulations. The EVAL6564H-100W implements a power factor correction (PFC) pre-regulator 100W, continuous power, on a regulated 400V rail from a wide-range mains voltage and providing for the reduction of the mains harmonics, allowing the European EN61000-3-2 or the Japanese JEITAMITI standard to be met. The regulated output voltage is typically the input for the cascaded.

• Line voltage range from 90VAC to 265VAC
• Minimum line frequency (fL) of 47Hz
• Regulated output voltage of 400V, rated output power of 100W
• Maximum 2fL output voltage ripple of 20Vpk-pk
• Hold-up time of 10ms (VDROP after hold-up time:300V)
• Minimum switching frequency of 40KHz
• Minimum estimated efficiency of 92% at Vin = 90VAC, POUT = 100W)
• Maximum ambient temperature of 50°C
• PCB type and size: single side, 35µm, CEM-1, 90 x 83mm

注释

Market demand for this product has caused an extension in leadtimes. Delivery dates may fluctuate. Product exempt from discounts.