LTC8043EN8#PBF

LTC8043EN8#PBF is a serial-input 12bit multiplying digital-to-analogue converter (DAC). It is a superior pin-compatible replacement for the DAC-8043. Improvements include better accuracy, better stability over temperature and supply variations, lower sensitivity to output amplifier offset, tighter timing specifications, and lower output capacitance. An easy-to-use 3-wire serial interface is well-suited to remote or isolated applications The LTC8043 is extremely versatile. It can be used for 2-quadrant and 4-quadrant multiplying, programmable gain, and single supply applications, such as noninverting voltage output mode. Applications include process control and industrial automation, remote microprocessor-controlled systems, digitally controlled filters and power supplies, programmable gain amplifiers, and automatic test equipment.

• Easy, fast and flexible serial interface, supply voltage is 3V typical at (VDD = 5V)
• 4-quadrant multiplication, low power consumption
• Low cost, 12bit resolution, integral nonlinearity is ±0.5LSB max at (VDD = 5V)
• Differential nonlinearity is ±0.5LSB maximum at (VDD = 5V, VREF = 10V, VIOUT = GND = 0V)
• Output current settling time is 0.25µs typical at (VDD = 5V, VREF = 10V, VIOUT = GND = 0V)
• Total harmonic distortion is -108dB typical at (VDD = 5V, VREF = 10V, VIOUT = GND = 0V)
• Output noise voltage density is 17nV/√Hz maximum at (VDD = 5V, VREF = 10V, VIOUT = GND = 0V)
• Supply current is 100µA maximum at (digital inputs = 0V or VDD)
• Gain temperature coefficient is 1ppm/°C typical at (VDD = 5V, VREF = 10V, VIOUT = GND = 0V)
• Operating temperature range from -40°C to 85°C, 8-lead PDIP package

注释

ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party