您已在下面突出显示的字段中输入包含无效字符的值。 请仅使用有效字符修改您的选择。

产品可能与您的搜索条件并不完全匹配

您买过此产品。 在订单历史记录中查看

 
 

MAX7375AXR105+T

振荡器, 硅, 1 MHz, 2.7 V至5.5 V电源, SC-70-3

MAXIM INTEGRATED PRODUCTS MAX7375AXR105+T
×

图片仅用于图解说明,详见产品说明。

制造商产品编号:
MAX7375AXR105+T
库存编号
2516474
查看所有技术文档

产品概述

The MAX7375AXR105+T is a silicon oscillator in 3 pin SC-70 package. This silicon oscillator, intended as a low cost improvement replacing ceramic resonators, crystals, crystal oscillator modules used as clock source for microcontrollers and UARTs in 3V, 3.3V and 5V applications. It is a fully integrated oscillator, supplied at specific factory-trimmed frequencies with a rail to rail 50% duty cycle square-wave output. The oscillator frequency is generated directly without the use of a phase-locked loop (PLL). No additional components are used to set or adjust the frequency. It is highly resistant to vibration and EMI, high output drive current and absence of high-impedance nodes also makes the oscillator less susceptible to dirty or humid operating conditions. With a wide operating temperature range, oscillator is a good choice for demanding home appliance environments & white goods.
  • Supply voltage range is 2.7V to 5.5V
  • Operating temperature range from -40°C to 125°C
  • Factory-trimmed oscillator (600KHz to 9.99MHz)
  • Output drive current of ±10mA & 2% initial accuracy
  • Temperature drift of ±50ppm/°C
  • Fast start-up time is 5µs
  • Maximum duty cycle range of 40% to 60%
  • 5ns Output rise and fall time, low EMI
  • Very low jitter of 160psp-p at 8MHz

应用

时钟与计时, 便携式器材

产品信息

想要查看类似产品?只需在下方选择所需属性并点击按钮 ×


:
1MHz

:
2.7V

:
5.5V

:
SC-70

:
3引脚

:
-40°C

:
125°C

:
-

:
MSL 1 -无限制
查找类似产品 选择并修改以上属性即可查找类似产品。

技术文档 (2)

CAD 下载

×

条款

CAD Models - Notice
CAD Models and drawings are provided to you on a revocable limited licence for your internal use only but remain the property of the manufacturer who retain all intellectual property rights and ownership. They are provided to assist you in decision making and as design guide but are not guaranteed to be error free, accurate or up to date and is not intended to be taken as advice.
Use of these CAD models and other options provided are downloaded and used entirely at your own risk and by continuing you confirm acceptance of the above.

接受 取消
包装类型 切割卷带

3,513 有货 需要更多?

3,513 UK 有库存,可在 4-5 个工作日内交货

CNY9.81 ( CNY11.09  含增值税)

定价不可用。 请联系客户服务

包装规格:
单件(切割供应)
多件: 1 最低: 1
数量 单价(含增值税) 您所支付金额(含增值税)
 
 
1+ CNY9.81 (CNY11.09)
优惠价格
合约价格
仅限网络价格
仅限网络合约价格
  ( )
10+ CNY9.35 (CNY10.57)
优惠价格
合约价格
仅限网络价格
仅限网络合约价格
  ( )
50+ CNY9.14 (CNY10.33)
优惠价格
合约价格
仅限网络价格
仅限网络合约价格
  ( )
100+ CNY7.84 (CNY8.86)
优惠价格
合约价格
仅限网络价格
仅限网络合约价格
  ( )
500+ CNY7.62 (CNY8.61)
优惠价格
合约价格
仅限网络价格
仅限网络合约价格
  ( )
1000+ CNY6.42 (CNY7.25)
优惠价格
合约价格
仅限网络价格
仅限网络合约价格
  ( )
 
 

定价不可用。 请联系客户服务

No longer stocked:: No Longer Manufactured::
添加到购物篮 添加到购物篮 预订
添加
受限制物品
添加部件编号/注释行
总价:
总价: ( )
总价: --